23 open source boards using the W25Q80BV
Real designs built with the W25Q80BV, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
NXP
Hackrf one
Charmve
120 × 75 mm416 partsBSD-2-Clause354STM32
Reworkctf
azonenberg
54 × 50 mm125 parts4LBSD-3-Clause33NXP
Marzipan
Josephrp
120 × 75 mm416 partsCustom license12NXP
Marzipan
alexmfz
120 × 75 mm416 partsGPL-2.03FPGA
Noob sdr
ainnovators
130.3 × 100 mm473 partsGPL-3.01NXP
Marzipan
greearb
120 × 75 mm416 partsGPL-2.01NXP
Marzipan
JensLiu
120 × 75 mm416 partsGPL-2.01NXP
Hackrf one
2ftg
120 × 75 mm416 partsGPL-2.00NXP
Marzipan
deepin-community
120 × 75 mm416 partsGPL-2.00NXP
Hackrf one
Meteora-Z
120 × 75 mm416 partsNo license0NXP
Hackrf one
Toysoft
120 × 75 mm416 partsGPL-2.00NXP
Hackrf one
zqupc
120 × 75 mm416 partsGPL-2.00NXP
Marzipan
Charmve
120 × 75 mm416 partsBSD-2-Clause354NXP
HackRF One
alexmfz
120 × 75 mm415 partsGPL-2.03NXP
Marzipan
Meteora-Z
120 × 75 mm416 partsNo license0NXP
Marzipan
zqupc
120 × 75 mm416 partsGPL-2.00NXP
Marzipan
2ftg
120 × 75 mm416 partsGPL-2.00NXP
Marzipan
Toysoft
120 × 75 mm416 partsGPL-2.00Neapolitan
Charmve
120 × 75 mm290 partsBSD-2-Clause354Neapolitan
alexmfz
120 × 75 mm290 partsGPL-2.03Neapolitan
Toysoft
120 × 75 mm290 partsGPL-2.00Neapolitan
2ftg
120 × 75 mm290 partsGPL-2.00Neapolitan
zqupc
120 × 75 mm290 partsGPL-2.00
How designs wire the W25Q80BV
Read from the KiCad layouts of 12 open source designs, one per repository: what each pin of the W25Q80BV connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 12 of 12 designs, most often 100 nF (then 470 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 4 | Connected to: GND 100% | — |
| VCCpin 8 | Connected to: VCC 100% |
|
6 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Hackrf one by Charmve, Reworkctf by azonenberg, Marzipan by Josephrp and HackRF One by alexmfz.
The W25Q80BV in open source designs
The gallery holds 23 open source boards using the W25Q80BV from 12 GitHub repositories; a typical one measures about 120 × 75 mm and carries around 416 components.
100% use four copper layers or more, and 87% carry an open source license.
The most starred is Hackrf one by Charmve.
Parts used alongside the W25Q80BV
What boards using the W25Q80BV are built for
W25Q80BV: common questions
Where can I find a W25Q80BV reference design?
Each of the 23 boards on this page is a real design using the W25Q80BV. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the W25Q80BV VCC pin?
The VCC pin has a decoupling capacitor on 12 of 12 designs, most often 100 nF (then 470 nF). Counted from the KiCad layouts of 12 open source designs using the W25Q80BV.
What parts are used alongside the W25Q80BV?
The MAX2837, MAX5864, MGA-81563, RFFC5072 and RX_HIGHPASS_FILTER appear in the most repositories here.
Which microcontrollers do boards using the W25Q80BV use?
Most are built on NXP (16), FPGA (1) and STM32 (1).
How big is a typical board using the W25Q80BV?
The median is 120 × 75 mm, and 0% are two-layer designs.
What is the most popular open source board using the W25Q80BV?
By GitHub stars, Hackrf one by Charmve, with 354 stars.
Can I simulate one of these boards using the W25Q80BV before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.