5 open source boards using the Micro_SD_Card
Real designs built with the Micro_SD_Card, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Seed3-DevKit-Pedal
daisyaudio
197 × 100 mm142 parts2LNo license3Seed3-DevKit-Eurorack
daisyaudio
141.9 × 128.5 mm130 parts2LNo license2STM32
TMIT FC SMT
keeratrajsinghwork
100 × 100 mm81 parts4LNo license0STM32
MC stack
keeratrajsinghwork
70 × 70 mm45 parts2LNo license0ESP32
CATS
rickwargo
86 × 70 mm27 parts2LNo license0
How designs wire the Micro_SD_Card
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the Micro_SD_Card connects to, and the resistors, capacitors and other passives placed on it.
- The DAT2_1 pin has a pull-up to 3.3V on 2 of 5 designs, most often 47 kΩ.
- The CD/DAT3_2 pin has a pull-up to 3.3V on 2 of 5 designs, most often 47 kΩ.
- The CD/DAT3_2 pin has a series resistor on 2 of 5 designs, most often 22 Ω.
- The CMD_3 pin has a pull-up to 3.3V on 2 of 5 designs, most often 47 kΩ.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| DAT2_1pin 1 | Connected to: Not connected 40% · 3.3V 20% · a signal 40% |
|
| CD/DAT3_2pin 2 | Connected to: ELECTROSMITH_DAISY_SEED_REV4 40% |
|
| CMD_3pin 3 | Connected to: ELECTROSMITH_DAISY_SEED_REV4 40%, a connector 40% |
|
| VDD_4pin 4 | Connected to: 3.3V 60% · a signal 40% | — |
| CLK_5pin 5 | Connected to: ELECTROSMITH_DAISY_SEED_REV4 40% |
|
| VSS_6pin 6 | Connected to: GND 100% | — |
| DAT0_7pin 7 | Connected to: ELECTROSMITH_DAISY_SEED_REV4 50% |
|
| DAT1_8pin 8 | Connected to: Not connected 50% · a signal 50% |
|
| SHIELDpin 9 | Connected to: Not connected 100% | — |
| Pin 10 | Connected to: Not connected 100% | — |
| Pin 11 | Connected to: Not connected 100% | — |
| SHIELD_MP1pin MP1 | Connected to: GND 100% | — |
| SHIELD_MP2pin MP2 | Connected to: GND 100% | — |
| SHIELD_MP3pin MP3 | Connected to: GND 100% | — |
| SHIELD_MP4pin MP4 | Connected to: GND 100% | — |
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Seed3-DevKit-Pedal by daisyaudio, Seed3-DevKit-Eurorack by daisyaudio, MC stack by keeratrajsinghwork and TMIT FC SMT by keeratrajsinghwork.
The Micro_SD_Card in open source designs
The gallery holds 5 open source boards using the Micro_SD_Card from 5 GitHub repositories; a typical one measures about 100 × 100 mm and carries around 81 components.
80% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is Seed3-DevKit-Pedal by daisyaudio.
Parts used alongside the Micro_SD_Card
What boards using the Micro_SD_Card are built for
Micro_SD_Card: common questions
Where can I find a Micro_SD_Card reference design?
Each of the 5 boards on this page is a real design using the Micro_SD_Card. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the Micro_SD_Card DAT2_1 pin?
The DAT2_1 pin has a pull-up to 3.3V on 2 of 5 designs, most often 47 kΩ. Counted from the KiCad layouts of 5 open source designs using the Micro_SD_Card.
What pull-up resistor is used on the Micro_SD_Card CD/DAT3_2 pin?
The CD/DAT3_2 pin has a pull-up to 3.3V on 2 of 5 designs, most often 47 kΩ. Counted from the KiCad layouts of 5 open source designs using the Micro_SD_Card.
What pull-up resistor is used on the Micro_SD_Card CMD_3 pin?
The CMD_3 pin has a pull-up to 3.3V on 2 of 5 designs, most often 47 kΩ. Counted from the KiCad layouts of 5 open source designs using the Micro_SD_Card.
What parts are used alongside the Micro_SD_Card?
The USBLC6-2SC6, Electrosmith_Daisy_Seed_Rev4, H11L1, MPU-6050 and STM32F411CEUx appear in the most repositories here.
Which microcontrollers do boards using the Micro_SD_Card use?
Most are built on STM32 (2) and ESP32 (1).
How big is a typical board using the Micro_SD_Card?
The median is 100 × 100 mm, and 80% are two-layer designs.
What is the most popular open source board using the Micro_SD_Card?
By GitHub stars, Seed3-DevKit-Pedal by daisyaudio, with 3 stars.
Can I simulate one of these boards using the Micro_SD_Card before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.