2 open source boards using the MicroSD_Card
Real designs built with the MicroSD_Card, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Pocket s
ridhinva
85 × 52 mm28 parts4LMIT1ESP32
Flip0pocket s
LordRobertShaw
85 × 52 mm28 parts4LNo license0
The MicroSD_Card in open source designs
The gallery holds 2 open source boards using the MicroSD_Card from 2 GitHub repositories; a typical one measures about 85 × 52 mm and carries around 28 components.
100% use four copper layers or more, and 50% carry an open source license.
The most starred is Pocket s by ridhinva.
Parts used alongside the MicroSD_Card
Microcontrollers on boards using the MicroSD_Card
What boards using the MicroSD_Card are built for
MicroSD_Card: common questions
Where can I find a MicroSD_Card reference design?
Each of the 2 boards on this page is a real design using the MicroSD_Card. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the MicroSD_Card?
The CC1101RGPR, ESP32-S3-WROOM-1-N8R8, PN5180A0ET/C110F, TP4056 and TPS62740DSST appear in the most repositories here.
Which microcontrollers do boards using the MicroSD_Card use?
Most are built on ESP32 (2).
How big is a typical board using the MicroSD_Card?
The median is 85 × 52 mm, and 0% are two-layer designs.
What is the most popular open source board using the MicroSD_Card?
By GitHub stars, Pocket s by ridhinva, with 1 stars.
Can I simulate one of these boards using the MicroSD_Card before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.