1 open source board using the PN5180A0ET/C110F
Real designs built with the PN5180A0ET/C110F, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ridhinvaThe PN5180A0ET/C110F in open source designs
The gallery holds 1 open source boards using the PN5180A0ET/C110F from 1 GitHub repository; a typical one measures about 85 × 52 mm and carries around 28 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is Pocket s by ridhinva.
Microcontrollers on boards using the PN5180A0ET/C110F
What boards using the PN5180A0ET/C110F are built for
PN5180A0ET/C110F: common questions
Where can I find a PN5180A0ET/C110F reference design?
Each of the 1 boards on this page is a real design using the PN5180A0ET/C110F. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the PN5180A0ET/C110F use?
Most are built on ESP32 (1).
How big is a typical board using the PN5180A0ET/C110F?
The median is 85 × 52 mm, and 0% are two-layer designs.
What is the most popular open source board using the PN5180A0ET/C110F?
By GitHub stars, Pocket s by ridhinva, with 1 stars.
Can I simulate one of these boards using the PN5180A0ET/C110F before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.