3 open source boards using the USB_C_Receptacle
Real designs built with the USB_C_Receptacle, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
- schematic only · 88 partsGD32
Aixun t3a rev
c0d3z3r0
88 partsNo license54 ESP32
Pocket s
ridhinva
85 × 52 mm28 parts4LMIT1ESP32
Flip0pocket s
LordRobertShaw
85 × 52 mm28 parts4LNo license0
The USB_C_Receptacle in open source designs
The gallery holds 3 open source boards using the USB_C_Receptacle from 3 GitHub repositories; a typical one measures about 85 × 52 mm and carries around 28 components.
100% use four copper layers or more, and 33% carry an open source license.
The most starred is Aixun t3a rev by c0d3z3r0.
Parts used alongside the USB_C_Receptacle
What boards using the USB_C_Receptacle are built for
USB_C_Receptacle: common questions
Where can I find a USB_C_Receptacle reference design?
Each of the 3 boards on this page is a real design using the USB_C_Receptacle. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the USB_C_Receptacle?
The CC1101RGPR, ESP32-S3-WROOM-1-N8R8, MicroSD_Card, PN5180A0ET/C110F and TP4056 appear in the most repositories here.
Which microcontrollers do boards using the USB_C_Receptacle use?
Most are built on ESP32 (2) and GD32 (1).
How big is a typical board using the USB_C_Receptacle?
The median is 85 × 52 mm, and 0% are two-layer designs.
What is the most popular open source board using the USB_C_Receptacle?
By GitHub stars, Aixun t3a rev by c0d3z3r0, with 54 stars.
Can I simulate one of these boards using the USB_C_Receptacle before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.