3 open source boards using the MTJ-883X1
Real designs built with the MTJ-883X1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
HoloCade Driver Shield
scifiuiguy
118 × 84.5 mm78 parts2LMIT1ESP32
HoloCade Driver Shield
scifiuiguy
118 × 84.5 mm78 parts2LNo license0ESP32
LBEAST Driver Shield
scifiuiguy
118 × 84.5 mm78 parts2LMIT0
The MTJ-883X1 in open source designs
The gallery holds 3 open source boards using the MTJ-883X1 from 3 GitHub repositories; a typical one measures about 118 × 84.5 mm and carries around 78 components.
100% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.
The most starred is HoloCade Driver Shield by scifiuiguy.
Parts used alongside the MTJ-883X1
Microcontrollers on boards using the MTJ-883X1
What boards using the MTJ-883X1 are built for
MTJ-883X1: common questions
Where can I find a MTJ-883X1 reference design?
Each of the 3 boards on this page is a real design using the MTJ-883X1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the MTJ-883X1?
The ADM3057ExRW, BTS7960B, ESP32-S3-2x22, LAN8720A and LM2576HVS-5 appear in the most repositories here.
Which microcontrollers do boards using the MTJ-883X1 use?
Most are built on ESP32 (3).
How big is a typical board using the MTJ-883X1?
The median is 118 × 84.5 mm, and 100% are two-layer designs.
What is the most popular open source board using the MTJ-883X1?
By GitHub stars, HoloCade Driver Shield by scifiuiguy, with 1 stars.
Can I simulate one of these boards using the MTJ-883X1 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.