8 open source boards using the ADM3057ExRW

Real designs built with the ADM3057ExRW, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

8 boardsClear filters|Most starred

How designs wire the ADM3057ExRW

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the ADM3057ExRW connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 4.7 µF).
  • The VISOIN pin has a series capacitor on 5 of 5 designs, most often 100 nF (then 4.7 µF).
  • The GNDISO pins have a series capacitor on 5 of 5 designs, most often 4.7 µF (then 100 nF).
  • The VISOOUT pin has a series capacitor on 5 of 5 designs, most often 4.7 µF (then 100 nF).
GND1pin 1, 2, 10Connected to: GND 100%
VCCpin 3Connected to: 5V 100%
  • Decoupling capacitor on 100% · 100 nF (5), 4.7 µF (4), 10 µF (1)
VIOpin 4Connected to: 3.3V 100%
  • Decoupling capacitor on 40% · 100 nF (2), 10 nF (1)
SILENTpin 6Connected to: GND 80% · not connected 20%
STBYpin 8Connected to: 3.3V 80% · not connected 20%
AUXINpin 9Connected to: Not connected 80% · a signal 20%
GND2pin 11, 15Connected to: GND 80% · a signal 20%
RSpin 12Connected to: GND 80% · a signal 20%
CANLpin 13Connected to: A connector 100%
  • Series resistor on 80% · 120 Ω (4)
VISOINpin 16Connected to: Signal 100%
  • Series capacitor on 100% · 100 nF (5), 4.7 µF (4), 10 nF (1)
AUXOUTpin 17Connected to: Not connected 80% · a signal 20%
GNDISOpin 18, 20Connected to: A connector 80%
  • Series capacitor on 100% · 4.7 µF (8), 100 nF (8), 220 nF (2)
VISOOUTpin 19Connected to: Signal 100%
  • Series capacitor on 100% · 4.7 µF (4), 100 nF (4), 220 nF (1)

3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include JABICAN-USB Pro by dragonlock2, HoloCade Driver Shield by scifiuiguy, HoloCade Driver Shield by scifiuiguy and LBEAST Universal Shield by scifiuiguy.

The ADM3057ExRW in open source designs

The gallery holds 8 open source boards using the ADM3057ExRW from 5 GitHub repositories; a typical one measures about 118 × 84.5 mm and carries around 75 components.

100% are two-layer designs, the rest use four layers or more, and 63% carry an open source license.

The most starred is JABICAN-USB Pro by dragonlock2.

Microcontrollers on boards using the ADM3057ExRW

What boards using the ADM3057ExRW are built for

ADM3057ExRW: common questions

Where can I find a ADM3057ExRW reference design?

Each of the 8 boards on this page is a real design using the ADM3057ExRW. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the ADM3057ExRW VCC pin?

The VCC pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 5 open source designs using the ADM3057ExRW.

How is the ADM3057ExRW VISOIN pin connected?

The VISOIN pin has a series capacitor on 5 of 5 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 5 open source designs using the ADM3057ExRW.

How is the ADM3057ExRW GNDISO pin connected?

The GNDISO pins have a series capacitor on 5 of 5 designs, most often 4.7 µF (then 100 nF). Counted from the KiCad layouts of 5 open source designs using the ADM3057ExRW.

What parts are used alongside the ADM3057ExRW?

The ESP32-S3-2x22, LAN8720A, LM2576HVS-5, BTS7960B and MTJ-883X1 appear in the most repositories here.

Which microcontrollers do boards using the ADM3057ExRW use?

Most are built on ESP32 (7) and NXP (1).

How big is a typical board using the ADM3057ExRW?

The median is 118 × 84.5 mm, and 100% are two-layer designs.

What is the most popular open source board using the ADM3057ExRW?

By GitHub stars, JABICAN-USB Pro by dragonlock2, with 13 stars.

Can I simulate one of these boards using the ADM3057ExRW before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part