11 open source boards using the ESP32-S3-2x22

Real designs built with the ESP32-S3-2x22, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

11 boardsClear filters|Most starred

The ESP32-S3-2x22 in open source designs

The gallery holds 11 open source boards using the ESP32-S3-2x22 from 4 GitHub repositories; a typical one measures about 118 × 84.5 mm and carries around 71 components.

100% are two-layer designs, the rest use four layers or more, and 55% carry an open source license.

The most starred is HoloCade Driver Shield by scifiuiguy.

Microcontrollers on boards using the ESP32-S3-2x22

ESP32-S3-2x22: common questions

Where can I find a ESP32-S3-2x22 reference design?

Each of the 11 boards on this page is a real design using the ESP32-S3-2x22. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the ESP32-S3-2x22?

The ADM3057ExRW, LAN8720A, LM2576HVS-5, BTS7960B and MTJ-883X1 appear in the most repositories here.

Which microcontrollers do boards using the ESP32-S3-2x22 use?

Most are built on ESP32 (11).

How big is a typical board using the ESP32-S3-2x22?

The median is 118 × 84.5 mm, and 100% are two-layer designs.

What is the most popular open source board using the ESP32-S3-2x22?

By GitHub stars, HoloCade Driver Shield by scifiuiguy, with 1 stars.

Can I simulate one of these boards using the ESP32-S3-2x22 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part