14 open source boards using the nRF52840_holyiot_18010
Real designs built with the nRF52840_holyiot_18010, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Nordic nRF
Carpo left
heyitscassio
126.3 × 92.7 mm64 parts2LCERN-OHL-S-2.029Nordic nRF
Alleycat left
hextral
139.8 × 136.9 mm116 parts2LNo license1Nordic nRF
Ursa base
plty
189.2 × 126.8 mm64 parts2LNo license1Nordic nRF
Arc
DynamicWhiteHat
326.6 × 123.8 mm415 parts2LNo license0Nordic nRF
Combined
sanoojes
416.3 × 149.4 mm239 parts2LMIT0Nordic nRF
Obscura60
HNBN9
285 × 96.5 mm158 parts2LNo license0Nordic nRF
Superflat
cheyao
102 × 85 mm103 parts2LNo license0Nordic nRF
Carpo right
heyitscassio
126.3 × 92.7 mm64 parts2LCERN-OHL-S-2.029Nordic nRF
DaNumPad unWired
TweetyDaBird
100 × 95.3 mm87 parts2LCustom license19Nordic nRF
Alleycat right
hextral
139.8 × 136.9 mm116 parts2LNo license1Nordic nRF
Left
sanoojes
207.2 × 149.2 mm238 parts2LMIT0Nordic nRF
One42
cyril279
252.3 × 111.8 mm113 parts2LMIT74Nordic nRF
Alleycat
hextral
225 × 136 mm115 parts2LNo license1Nordic nRF
Right
sanoojes
207.2 × 149.2 mm238 parts2LMIT0
How designs wire the nRF52840_holyiot_18010
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the nRF52840_holyiot_18010 connects to, and the resistors, capacitors and other passives placed on it.
- The P0.19 pin is left unconnected on 6 of 9 designs (a signal on 3).
- The P1.14-LF pin is left unconnected on 5 of 5 designs.
- The P1.12-LF pin is left unconnected on 5 of 5 designs.
- The P0.25 pin is left unconnected on 5 of 5 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1, 25, 37 | Connected to: GND 78% | — |
| P0.31-LF-Apin 11 | Connected to: Signal 67% · not connected 33% |
|
| VDD_NRFpin 14 | Connected to: 3.3V 89% |
|
| P0.19pin 20 | Connected to: Not connected 67% · a signal 33% | — |
| VBUSpin 22 | Connected to: VBUS 89% | — |
| P1.14-LFpin 38 | Connected to: Not connected 100% | — |
| P1.12-LFpin 39 | Connected to: Not connected 100% | — |
| P0.25pin 40 | Connected to: Not connected 100% | — |
| P0.11pin 41 | Connected to: Not connected 80% · a signal 20% | — |
| P1.08pin 42 | Connected to: Not connected 80% · a signal 20% | — |
| P0.27pin 43 | Connected to: Not connected 80% · a signal 20% | — |
| P0.08pin 44 | Connected to: Not connected 80% · a signal 20% | — |
| P0.06pin 45 | Connected to: Not connected 80% · a signal 20% | — |
| P0.26pin 46 | Connected to: Not connected 80% · a signal 20% | — |
| P1.07-LFpin 47 | Connected to: Not connected 100% | — |
| P1.05-LFpin 48 | Connected to: Not connected 100% | — |
| P0.24pin 49 | Connected to: Not connected 100% | — |
| P0.20pin 50 | Connected to: Not connected 80% · a signal 20% | — |
| P0.17pin 51 | Connected to: Not connected 80% · a signal 20% | — |
| P0.15pin 52 | Connected to: Not connected 80% · a signal 20% | — |
| P0.14pin 53 | Connected to: Not connected 80% · a signal 20% | — |
| P0.13pin 54 | Connected to: Not connected 80% · a signal 20% | — |
| P0.16pin 55 | Connected to: Not connected 80% · a signal 20% | — |
30 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include One42 by cyril279, Carpo left by heyitscassio, DaNumPad unWired by TweetyDaBird and Alleycat by hextral.
The nRF52840_holyiot_18010 in open source designs
The gallery holds 14 open source boards using the nRF52840_holyiot_18010 from 9 GitHub repositories; a typical one measures about 198.2 × 125.3 mm and carries around 116 components.
100% are two-layer designs, the rest use four layers or more, and 43% carry an open source license.
The most starred is One42 by cyril279.
Parts used alongside the nRF52840_holyiot_18010
Microcontrollers on boards using the nRF52840_holyiot_18010
What boards using the nRF52840_holyiot_18010 are built for
nRF52840_holyiot_18010: common questions
Where can I find a nRF52840_holyiot_18010 reference design?
Each of the 14 boards on this page is a real design using the nRF52840_holyiot_18010. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the nRF52840_holyiot_18010 P0.19 pin connected?
The P0.19 pin is left unconnected on 6 of 9 designs (a signal on 3). Counted from the KiCad layouts of 9 open source designs using the nRF52840_holyiot_18010.
How is the nRF52840_holyiot_18010 P1.14-LF pin connected?
The P1.14-LF pin is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 9 open source designs using the nRF52840_holyiot_18010.
How is the nRF52840_holyiot_18010 P1.12-LF pin connected?
The P1.12-LF pin is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 9 open source designs using the nRF52840_holyiot_18010.
What parts are used alongside the nRF52840_holyiot_18010?
The BQ24075RGT, XC6206PXXXMR, SRV05-4 and TP4056 appear in the most repositories here.
Which microcontrollers do boards using the nRF52840_holyiot_18010 use?
Most are built on Nordic nRF (14).
How big is a typical board using the nRF52840_holyiot_18010?
The median is 198.2 × 125.3 mm, and 100% are two-layer designs.
What is the most popular open source board using the nRF52840_holyiot_18010?
By GitHub stars, One42 by cyril279, with 74 stars.
Can I simulate one of these boards using the nRF52840_holyiot_18010 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.