6 open source boards using the RASPBERRY_PI_4B_4GB

Real designs built with the RASPBERRY_PI_4B_4GB, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the RASPBERRY_PI_4B_4GB

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the RASPBERRY_PI_4B_4GB connects to, and the resistors, capacitors and other passives placed on it.

  • The 5V pins is tied to 5V on 100% of them.
  • The GPIO25/GPIO_GEN6 pin is left unconnected on 4 of 5 designs.
  • The ID_SD pin is left unconnected on 4 of 5 designs.
  • The ID_SC pin is left unconnected on 4 of 5 designs.
3V3pin 1, 17Connected to: Not connected 60% · 3.3V 40%
5Vpin 2, 4Connected to: 5V 100%
GPIO2/SDA1pin 3Connected to: Not connected 60% · a signal 40%
GPIO3/SCL1pin 5Connected to: Not connected 60% · a signal 40%
GNDpin 6, 9, 14, 20, 25, 30, 34, 39Connected to: GND 100%
GPIO4/GPIO_GCKLpin 7Connected to: Not connected 60% · a signal 40%
GPIO25/GPIO_GEN6pin 22Connected to: Not connected 80% · a signal 20%
GPIO8/SPI_CE0pin 24Connected to: Not connected 60% · a signal 40%
GPIO7/SPI_CE1pin 26Connected to: Not connected 60% · a signal 40%
ID_SDpin 27Connected to: Not connected 80% · a signal 20%
ID_SCpin 28Connected to: Not connected 80% · a signal 20%
GPIO5pin 29Connected to: Not connected 60% · a signal 40%
GPIO19pin 35Connected to: Not connected 60% · a signal 40%
GPIO26pin 37Connected to: Not connected 60% · a signal 40%
GPIO21pin 40Connected to: Not connected 60% · a signal 40%
SHIELDpin S1, S2, S3, S4Connected to: Not connected 60% · GND 40%

16 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 433MHz Ground Station Board by stanford-ssi, Universal connector board by HCL-Hbot, RobotEvakuasiGempa by bostang and X17-Pi-Shield by purduerov.

The RASPBERRY_PI_4B_4GB in open source designs

The gallery holds 6 open source boards using the RASPBERRY_PI_4B_4GB from 6 GitHub repositories; a typical one measures about 96.3 × 78.3 mm and carries around 35 components.

67% are two-layer designs, the rest use four layers or more, and 17% carry an open source license.

The most starred is 433MHz Ground Station Board by stanford-ssi.

Parts used alongside the RASPBERRY_PI_4B_4GB

Microcontrollers on boards using the RASPBERRY_PI_4B_4GB

RASPBERRY_PI_4B_4GB: common questions

Where can I find a RASPBERRY_PI_4B_4GB reference design?

Each of the 6 boards on this page is a real design using the RASPBERRY_PI_4B_4GB. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the RASPBERRY_PI_4B_4GB 5V pin connected?

The 5V pins is tied to 5V on 100% of them. Counted from the KiCad layouts of 5 open source designs using the RASPBERRY_PI_4B_4GB.

How is the RASPBERRY_PI_4B_4GB GPIO25/GPIO_GEN6 pin connected?

The GPIO25/GPIO_GEN6 pin is left unconnected on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the RASPBERRY_PI_4B_4GB.

How is the RASPBERRY_PI_4B_4GB ID_SD pin connected?

The ID_SD pin is left unconnected on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the RASPBERRY_PI_4B_4GB.

Which microcontrollers do boards using the RASPBERRY_PI_4B_4GB use?

Most are built on Raspberry Pi (5) and ESP32 (1).

How big is a typical board using the RASPBERRY_PI_4B_4GB?

The median is 96.3 × 78.3 mm, and 67% are two-layer designs.

What is the most popular open source board using the RASPBERRY_PI_4B_4GB?

By GitHub stars, 433MHz Ground Station Board by stanford-ssi, with 13 stars.

Can I simulate one of these boards using the RASPBERRY_PI_4B_4GB before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part