3 open source boards using the S25FL256SAGNFI001

Real designs built with the S25FL256SAGNFI001, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The S25FL256SAGNFI001 in open source designs

The gallery holds 3 open source boards using the S25FL256SAGNFI001 from 3 GitHub repositories; a typical one measures about 120 × 60 mm and carries around 295 components.

100% use four copper layers or more, and 33% carry an open source license.

The most starred is ZynqPCB by juliancoy.

Microcontrollers on boards using the S25FL256SAGNFI001

What boards using the S25FL256SAGNFI001 are built for

S25FL256SAGNFI001: common questions

Where can I find a S25FL256SAGNFI001 reference design?

Each of the 3 boards on this page is a real design using the S25FL256SAGNFI001. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the S25FL256SAGNFI001?

The APDS-9960, LSM6DSLTR, TLV320AIC3104, TPS51200DRCR and USB3320 appear in the most repositories here.

Which microcontrollers do boards using the S25FL256SAGNFI001 use?

Most are built on FPGA (2) and Microchip SAM (1).

How big is a typical board using the S25FL256SAGNFI001?

The median is 120 × 60 mm, and 0% are two-layer designs.

What is the most popular open source board using the S25FL256SAGNFI001?

By GitHub stars, ZynqPCB by juliancoy, with 75 stars.

Can I simulate one of these boards using the S25FL256SAGNFI001 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part