5 open source boards using the TPS51200DRCR

Real designs built with the TPS51200DRCR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the TPS51200DRCR

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TPS51200DRCR connects to, and the resistors, capacitors and other passives placed on it.

  • The VLDOIN pin has a decoupling capacitor on 5 of 5 designs, most often 10 µF (then 470 nF).
  • The VO pin has a capacitor to GND on 5 of 5 designs, most often 10 µF.
  • The VOSNS pin has a capacitor to GND on 5 of 5 designs, most often 10 µF.
  • The REFOUT pin has a capacitor to GND on 5 of 5 designs, most often 100 nF.
REFINpin 1Connected to: Signal 60% · VREF 40%
  • Capacitor to GND on 60% · 1 nF (2), 100 nF (1)
  • Resistor to GND on 60% · 10 kΩ (3)
  • Pull-up to 1.35V on 40% · 10 kΩ (2)
VLDOINpin 2Connected to: 1.35V 80% · a signal 20%
  • Decoupling capacitor on 100% · 10 µF (9), 470 nF (2), 100 nF (1)
VOpin 3Connected to: Signal 80% · 0.675V 20%
  • Capacitor to GND on 100% · 10 µF (15)
  • Series resistor on 80% · 50 Ω (3)
PGNDpin 4Connected to: GND 100%
VOSNSpin 5Connected to: Signal 80% · 0.675V 20%
  • Capacitor to GND on 100% · 10 µF (15)
  • Series resistor on 80% · 50 Ω (3)
REFOUTpin 6Connected to: Signal 80% · VREFDQ 20%
  • Capacitor to GND on 100% · 100 nF (6)
ENpin 7Connected to: The microcontroller 40% · VCCOB33 20%
  • Pull-up to 3.3V on 80% · 20 kΩ (2), 10 kΩ (2)
GNDpin 8Connected to: GND 100%
PGOODpin 9Connected to: Signal 80% · not connected 20%
  • Pull-up to 3.3V on 80% · 100 kΩ (3), 10 kΩ (1)
VINpin 10Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 4.7 µF (4), 10 µF (1)
EPADpin 11Connected to: GND 80% · not connected 20%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ZynqPCB by juliancoy, Digital board v1 by es-ude, Artix-7-FPGA-Dev-Board by LZajmi and Arctic video by aerogull.

The TPS51200DRCR in open source designs

The gallery holds 5 open source boards using the TPS51200DRCR from 5 GitHub repositories; a typical one measures about 120 × 65 mm and carries around 295 components.

100% use four copper layers or more, and 40% carry an open source license.

The most starred is ZynqPCB by juliancoy.

Microcontrollers on boards using the TPS51200DRCR

What boards using the TPS51200DRCR are built for

TPS51200DRCR: common questions

Where can I find a TPS51200DRCR reference design?

Each of the 5 boards on this page is a real design using the TPS51200DRCR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the TPS51200DRCR VLDOIN pin?

The VLDOIN pin has a decoupling capacitor on 5 of 5 designs, most often 10 µF (then 470 nF). Counted from the KiCad layouts of 5 open source designs using the TPS51200DRCR.

How is the TPS51200DRCR VO pin connected?

The VO pin has a capacitor to GND on 5 of 5 designs, most often 10 µF. Counted from the KiCad layouts of 5 open source designs using the TPS51200DRCR.

How is the TPS51200DRCR VOSNS pin connected?

The VOSNS pin has a capacitor to GND on 5 of 5 designs, most often 10 µF. Counted from the KiCad layouts of 5 open source designs using the TPS51200DRCR.

What parts are used alongside the TPS51200DRCR?

The APDS-9960, AS4C256M16D3, KSZ9031RNXCA, LSM6DSLTR and S25FL256SAGNFI001 appear in the most repositories here.

Which microcontrollers do boards using the TPS51200DRCR use?

Most are built on FPGA (4) and RP2040/RP2350 (1).

How big is a typical board using the TPS51200DRCR?

The median is 120 × 65 mm, and 0% are two-layer designs.

What is the most popular open source board using the TPS51200DRCR?

By GitHub stars, ZynqPCB by juliancoy, with 75 stars.

Can I simulate one of these boards using the TPS51200DRCR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part