4 open source boards using the SC16IS752IPW,128

Real designs built with the SC16IS752IPW,128, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filters|Most starred

The SC16IS752IPW,128 in open source designs

The gallery holds 4 open source boards using the SC16IS752IPW,128 from 4 GitHub repositories; a typical one measures about 118 × 73 mm and carries around 217 components.

67% use four copper layers or more, and 25% carry an open source license.

The most starred is Cm4 motherboard by Twisted-Fields.

Microcontrollers on boards using the SC16IS752IPW,128

What boards using the SC16IS752IPW,128 are built for

SC16IS752IPW,128: common questions

Where can I find a SC16IS752IPW,128 reference design?

Each of the 4 boards on this page is a real design using the SC16IS752IPW,128. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the SC16IS752IPW,128?

The ADS1115IDGSR, CA-IS3050G, ET6226M, FJ5461AH and FT231XS-R appear in the most repositories here.

Which microcontrollers do boards using the SC16IS752IPW,128 use?

Most are built on Raspberry Pi (2) and ESP32 (1).

How big is a typical board using the SC16IS752IPW,128?

The median is 118 × 73 mm, and 33% are two-layer designs.

What is the most popular open source board using the SC16IS752IPW,128?

By GitHub stars, Cm4 motherboard by Twisted-Fields, with 81 stars.

Can I simulate one of these boards using the SC16IS752IPW,128 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part