5 open source boards using the SGP40
Real designs built with the SGP40, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
ClimateSprinklerController
kbx81
217 × 108 mm189 parts2LNo license55Nordic nRF
Pcb
UPM-SPV
0.7 × 0.7 mm40 parts4LCERN-OHL-S-2.00ESP32
Airnode s3
AskAlice
70 × 50 mm31 parts2LNo license0ESP32
Roomnode s3
AskAlice
65 × 50 mm31 parts2LNo license0RoomSensor 001 LCD
jirihusak
65.5 × 66.5 mm33 parts2LGPL-3.04
The SGP40 in open source designs
The gallery holds 5 open source boards using the SGP40 from 4 GitHub repositories; a typical one measures about 65.5 × 50 mm and carries around 33 components.
80% are two-layer designs, the rest use four layers or more, and 40% carry an open source license.
The most starred is ClimateSprinklerController by kbx81.
Parts used alongside the SGP40
Microcontrollers on boards using the SGP40
What boards using the SGP40 are built for
SGP40: common questions
Where can I find a SGP40 reference design?
Each of the 5 boards on this page is a real design using the SGP40. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the SGP40 use?
Most are built on ESP32 (3) and Nordic nRF (1).
How big is a typical board using the SGP40?
The median is 65.5 × 50 mm, and 80% are two-layer designs.
What is the most popular open source board using the SGP40?
By GitHub stars, ClimateSprinklerController by kbx81, with 55 stars.
Can I simulate one of these boards using the SGP40 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.