9 open source boards using the SI5351A-B-GTR
Real designs built with the SI5351A-B-GTR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
PhaseLoom
AndersBNielsen
68.8 × 53.6 mm77 parts4LNo license45Main board
esl-epfl
144.3 × 143.8 mm253 parts4LNo license11FABulous board
FPGA-Research
101.2 × 63.5 mm75 parts4LApache-2.06RP2040/RP2350
RP2040-mini-SDR
Keyaan-07
74.3 × 20 mm51 parts4LMIT3Main board
esl-epfl
144.3 × 143.8 mm259 parts4LNo license2FPGA
SN-64
FantomZap
101.8 × 80.5 mm383 parts6LNo license1WPT-01-TRANSMITTER
SasataniLab
70 × 85 mm185 parts4LAGPL-3.00FPGA
Orange Crab
openconcepts-ar
51.2 × 25.8 mm153 parts6LCustom license1Si5351A
greatscottgadgets
100 × 70 mm80 parts4LGPL-2.021
How designs wire the SI5351A-B-GTR
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the SI5351A-B-GTR connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a decoupling capacitor on 8 of 9 designs, most often 100 nF (then 10 µF).
- The XA pin has a crystal on 8 of 9 designs, most often 25 MHz (then 0 Hz).
- The XB pin has a crystal on 7 of 9 designs, most often 25 MHz (then 0 Hz).
- The VDDO pin has a decoupling capacitor on 7 of 9 designs, most often 100 nF (then 10 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VDDpin 1 | Connected to: 3.3V 78% · a signal 22% |
|
| XApin 2 | Connected to: Signal 100% |
|
| XBpin 3 | Connected to: Signal 100% |
|
| SCLpin 4 | Connected to: A connector 33%, the microcontroller 33%, TCA9548ARGER 22% |
|
| SDApin 5 | Connected to: A connector 33%, the microcontroller 33%, TCA9548ARGER 22% |
|
| CLK2pin 6 | Connected to: A connector 22% · not connected 44% |
|
| VDDOpin 7 | Connected to: 3.3V 78% · a signal 22% |
|
| GNDpin 8 | Connected to: GND 100% | — |
| CLK1pin 9 | Connected to: Signal 78% · not connected 22% |
|
| CLK0pin 10 | Connected to: Signal 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include PhaseLoom by AndersBNielsen, Si5351A by greatscottgadgets, Main board by esl-epfl and FABulous board by FPGA-Research.
The SI5351A-B-GTR in open source designs
The gallery holds 9 open source boards using the SI5351A-B-GTR from 9 GitHub repositories; a typical one measures about 100 × 70 mm and carries around 153 components.
100% use four copper layers or more, and 44% carry an open source license.
The most starred is PhaseLoom by AndersBNielsen.
Parts used alongside the SI5351A-B-GTR
Microcontrollers on boards using the SI5351A-B-GTR
What boards using the SI5351A-B-GTR are built for
SI5351A-B-GTR: common questions
Where can I find a SI5351A-B-GTR reference design?
Each of the 9 boards on this page is a real design using the SI5351A-B-GTR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the SI5351A-B-GTR VDD pin?
The VDD pin has a decoupling capacitor on 8 of 9 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 9 open source designs using the SI5351A-B-GTR.
How is the SI5351A-B-GTR XA pin connected?
The XA pin has a crystal on 8 of 9 designs, most often 25 MHz (then 0 Hz). Counted from the KiCad layouts of 9 open source designs using the SI5351A-B-GTR.
How is the SI5351A-B-GTR XB pin connected?
The XB pin has a crystal on 7 of 9 designs, most often 25 MHz (then 0 Hz). Counted from the KiCad layouts of 9 open source designs using the SI5351A-B-GTR.
What parts are used alongside the SI5351A-B-GTR?
The W25Q128JVSIQ, 24AA02E-OT, 74AHC1G04, 74AHC244 and 74AHCT1G08 appear in the most repositories here.
Which microcontrollers do boards using the SI5351A-B-GTR use?
Most are built on FPGA (2), AVR/Arduino (1) and RP2040/RP2350 (1).
How big is a typical board using the SI5351A-B-GTR?
The median is 100 × 70 mm, and 0% are two-layer designs.
What is the most popular open source board using the SI5351A-B-GTR?
By GitHub stars, PhaseLoom by AndersBNielsen, with 45 stars.
Can I simulate one of these boards using the SI5351A-B-GTR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.