6 open source boards using the 74AHCT1G08
Real designs built with the 74AHCT1G08, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Main board
esl-epfl
144.3 × 143.8 mm253 parts4LNo license11Main board
esl-epfl
144.3 × 143.8 mm259 parts4LNo license2ShoutDUINO
HWS-XMS
100.8 × 53.3 mm106 parts4LMIT1RP2040/RP2350
PiEBV
Low-Boom
126 × 126 mm82 parts4LGPL-3.01ESP8266
Climatedisplay
Qeteshpony
100 × 100 mm59 parts2LBSD-2-Clause0AOS16 Double Buffer
AJain9199
50 × 75 mm63 parts4LNo license1
How designs wire the 74AHCT1G08
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the 74AHCT1G08 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF.
- Pin 2 has a resistor to GND on 3 of 6 designs, most often 10 kΩ.
- Pin 2 has a series resistor on 3 of 6 designs, most often 4.7 kΩ (then 100 Ω).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: A connector 33% · 3.3V 33% |
|
| Pin 2 | Connected to: A connector 33% |
|
| GNDpin 3 | Connected to: GND 100% | — |
| Pin 4 | Connected to: FT4232HL 33% |
|
| VCCpin 5 | Connected to: 5V 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Main board by esl-epfl, Main board by esl-epfl, AOS16 Double Buffer by AJain9199 and ShoutDUINO by HWS-XMS.
The 74AHCT1G08 in open source designs
The gallery holds 6 open source boards using the 74AHCT1G08 from 6 GitHub repositories; a typical one measures about 113.4 × 113 mm and carries around 94 components.
83% use four copper layers or more, and 50% carry an open source license.
The most starred is Main board by esl-epfl.
Parts used alongside the 74AHCT1G08
Microcontrollers on boards using the 74AHCT1G08
What boards using the 74AHCT1G08 are built for
74AHCT1G08: common questions
Where can I find a 74AHCT1G08 reference design?
Each of the 6 boards on this page is a real design using the 74AHCT1G08. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74AHCT1G08 VCC pin?
The VCC pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF. Counted from the KiCad layouts of 6 open source designs using the 74AHCT1G08.
What resistor goes on the 74AHCT1G08 pin 2?
Pin 2 has a resistor to GND on 3 of 6 designs, most often 10 kΩ. Counted from the KiCad layouts of 6 open source designs using the 74AHCT1G08.
What parts are used alongside the 74AHCT1G08?
The 24AA02E-OT, 74AHC1G04, 74AHC244, BIWIN_DTS04GE_SMD and FT4232HL appear in the most repositories here.
Which microcontrollers do boards using the 74AHCT1G08 use?
Most are built on ESP8266 (1) and RP2040/RP2350 (1).
How big is a typical board using the 74AHCT1G08?
The median is 113.4 × 113 mm, and 17% are two-layer designs.
What is the most popular open source board using the 74AHCT1G08?
By GitHub stars, Main board by esl-epfl, with 11 stars.
Can I simulate one of these boards using the 74AHCT1G08 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.