7 open source boards using the SN74AXC4T774RSVR

Real designs built with the SN74AXC4T774RSVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the SN74AXC4T774RSVR

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the SN74AXC4T774RSVR connects to, and the resistors, capacitors and other passives placed on it.

  • The VCCA pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 1 µF).
  • The VCCB pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 1 µF).
  • The OE pin is tied to GND on 4 of 6 designs (a signal on 2).
  • The DIR1 pin is tied to 3.3V on 4 of 6 designs.
DIR3pin 5Connected to: GND 50% · 3.3V 33% · a signal 17%
  • Capacitor to GND on 50% · 100 nF (3), 1 µF (1)
OEpin 7Connected to: GND 67% · a signal 33%
GNDpin 8Connected to: GND 100%
B4pin 9Connected to: Another IC 50%
  • Series resistor on 33% · 22 Ω (1)
VCCBpin 13Connected to: VDDIO 83% · a signal 17%
  • Decoupling capacitor on 83% · 100 nF (7), 1 µF (1)
VCCApin 14Connected to: 3.3V 83% · a signal 17%
  • Decoupling capacitor on 100% · 100 nF (5), 1 µF (1)
DIR1pin 15Connected to: 3.3V 67% · GND 17% · a signal 17%
DIR2pin 16Connected to: 3.3V 67% · GND 17% · a signal 17%

8 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include GoodPocketWatch by travisgoodspeed, Main board by esl-epfl, VersaSens by esl-epfl and Main board by esl-epfl.

The SN74AXC4T774RSVR in open source designs

The gallery holds 7 open source boards using the SN74AXC4T774RSVR from 6 GitHub repositories; a typical one measures about 72.9 × 101.2 mm and carries around 138 components.

86% use four copper layers or more, and 0% carry an open source license.

The most starred is GoodPocketWatch by travisgoodspeed.

Microcontrollers on boards using the SN74AXC4T774RSVR

SN74AXC4T774RSVR: common questions

Where can I find a SN74AXC4T774RSVR reference design?

Each of the 7 boards on this page is a real design using the SN74AXC4T774RSVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the SN74AXC4T774RSVR VCCA pin?

The VCCA pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 6 open source designs using the SN74AXC4T774RSVR.

What decoupling capacitors do designs use on the SN74AXC4T774RSVR VCCB pin?

The VCCB pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 6 open source designs using the SN74AXC4T774RSVR.

How is the SN74AXC4T774RSVR OE pin connected?

The OE pin is tied to GND on 4 of 6 designs (a signal on 2). Counted from the KiCad layouts of 6 open source designs using the SN74AXC4T774RSVR.

What parts are used alongside the SN74AXC4T774RSVR?

The TLV75801PDBV, 24AA02E-OT, 74AHC1G04, 74AHC244 and 74AHCT1G08 appear in the most repositories here.

Which microcontrollers do boards using the SN74AXC4T774RSVR use?

Most are built on Nordic nRF (1).

How big is a typical board using the SN74AXC4T774RSVR?

The median is 72.9 × 101.2 mm, and 14% are two-layer designs.

What is the most popular open source board using the SN74AXC4T774RSVR?

By GitHub stars, GoodPocketWatch by travisgoodspeed, with 568 stars.

Can I simulate one of these boards using the SN74AXC4T774RSVR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part