2 open source boards using the SKY65404-31
Real designs built with the SKY65404-31, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32Emb drone flight stack
CGainsWorks
497.4 × 154.7 mm1182 parts6LNo license0
ESP32OpenSourceDrone
497.4 × 154.7 mm1182 parts6LNo license0
The SKY65404-31 in open source designs
The gallery holds 2 open source boards using the SKY65404-31 from 2 GitHub repositories; a typical one measures about 497.4 × 154.7 mm and carries around 1182 components.
100% use four copper layers or more, and 0% carry an open source license.
The most starred is Emb drone flight stack by CGainsWorks.
Parts used alongside the SKY65404-31
Microcontrollers on boards using the SKY65404-31
What boards using the SKY65404-31 are built for
SKY65404-31: common questions
Where can I find a SKY65404-31 reference design?
Each of the 2 boards on this page is a real design using the SKY65404-31. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the SKY65404-31?
The ADPL40502AUJZ-1.2-R7, AT7456E, ATMEGA4809-AF, BMP390 and ESP32-C3-MINI-1-H4X appear in the most repositories here.
Which microcontrollers do boards using the SKY65404-31 use?
Most are built on ESP32 (2).
How big is a typical board using the SKY65404-31?
The median is 497.4 × 154.7 mm, and 0% are two-layer designs.
What is the most popular open source board using the SKY65404-31?
By GitHub stars, Emb drone flight stack by CGainsWorks, with 0 stars.
Can I simulate one of these boards using the SKY65404-31 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.