4 open source boards using the ESP32-WROOM-32E-H4
Real designs built with the ESP32-WROOM-32E-H4, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
WeatherV3-kernelcon2026
ZonkSec
66 × 143.3 mm82 parts2LNo license4ESP32
Esp32-wroom-32-usb development board
Habib-creater
51.8 × 31 mm29 parts2LCERN-OHL-S-2.01ESP32
Emb drone flight stack
CGainsWorks
497.4 × 154.7 mm1182 parts6LNo license0ESP32
OpenSourceDrone
CGainsWorks
497.4 × 154.7 mm1182 parts6LNo license0
The ESP32-WROOM-32E-H4 in open source designs
The gallery holds 4 open source boards using the ESP32-WROOM-32E-H4 from 4 GitHub repositories; a typical one measures about 281.7 × 149 mm and carries around 632 components.
50% are two-layer designs, the rest use four layers or more, and 25% carry an open source license.
The most starred is WeatherV3-kernelcon2026 by ZonkSec.
Parts used alongside the ESP32-WROOM-32E-H4
Microcontrollers on boards using the ESP32-WROOM-32E-H4
What boards using the ESP32-WROOM-32E-H4 are built for
ESP32-WROOM-32E-H4: common questions
Where can I find a ESP32-WROOM-32E-H4 reference design?
Each of the 4 boards on this page is a real design using the ESP32-WROOM-32E-H4. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the ESP32-WROOM-32E-H4?
The ADPL40502AUJZ-1.2-R7, AT7456E, ATMEGA4809-AF, BMP390 and ESP32-C3-MINI-1-H4X appear in the most repositories here.
Which microcontrollers do boards using the ESP32-WROOM-32E-H4 use?
Most are built on ESP32 (4).
How big is a typical board using the ESP32-WROOM-32E-H4?
The median is 281.7 × 149 mm, and 50% are two-layer designs.
What is the most popular open source board using the ESP32-WROOM-32E-H4?
By GitHub stars, WeatherV3-kernelcon2026 by ZonkSec, with 4 stars.
Can I simulate one of these boards using the ESP32-WROOM-32E-H4 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.