3 open source boards using the SN74LVC1G32
Real designs built with the SN74LVC1G32, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32Benchy2 Motherboard
Daxxn
159.5 × 105 mm951 parts8LAGPL-3.02
STM32Benchy Signal Generator
88 × 82 mm141 parts4LAGPL-3.02
STM32BenchyReloaded VoltMeter
49.5 × 61 mm130 parts2LAGPL-3.02
The SN74LVC1G32 in open source designs
The gallery holds 3 open source boards using the SN74LVC1G32 from 1 GitHub repository; a typical one measures about 88 × 82 mm and carries around 141 components.
67% use four copper layers or more, and 100% carry an open source license.
The most starred is Benchy2 Motherboard by Daxxn.
Microcontrollers on boards using the SN74LVC1G32
What boards using the SN74LVC1G32 are built for
SN74LVC1G32: common questions
Where can I find a SN74LVC1G32 reference design?
Each of the 3 boards on this page is a real design using the SN74LVC1G32. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the SN74LVC1G32 use?
Most are built on STM32 (3).
How big is a typical board using the SN74LVC1G32?
The median is 88 × 82 mm, and 33% are two-layer designs.
What is the most popular open source board using the SN74LVC1G32?
By GitHub stars, Benchy2 Motherboard by Daxxn, with 2 stars.
Can I simulate one of these boards using the SN74LVC1G32 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.