17 open source boards using the SN74LVC1T45DCKR
Real designs built with the SN74LVC1T45DCKR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGA
Base board
GlasgowEmbedded
80 × 49 mm222 parts4L0BSD2.2kUsb uart shift
florolf
34.4 × 16 mm40 parts2LNo license7RP2040/RP2350
Opensync before chb h placement-20260915
ErichZimmer
160 × 100 mm233 parts2LCERN-OHL-S-2.04FPGA
Base board
nanographs
80 × 49 mm234 parts4L0BSD3ESP32
Suspension accel
meyerAurelius
20.6 × 74 mm38 parts4LNo license0Glasgow Test Jig
GlasgowEmbedded
108 × 45 mm108 parts2L0BSD2.2kRP2040/RP2350
Opensync
ErichZimmer
160 × 100 mm220 parts4LCERN-OHL-S-2.04Glasgow Test Jig
nanographs
108 × 45 mm108 parts2L0BSD3RP2040/RP2350
Agent asc
ErichZimmer
160 × 100 mm217 parts4LCERN-OHL-S-2.04RP2040/RP2350
Agent entry vias
ErichZimmer
160 × 100 mm217 parts4LCERN-OHL-S-2.04RP2040/RP2350
Before
ErichZimmer
160 × 100 mm217 parts4LCERN-OHL-S-2.04RP2040/RP2350
Candidate
ErichZimmer
160 × 100 mm217 parts4LCERN-OHL-S-2.04RP2040/RP2350
Final candidate
ErichZimmer
160 × 100 mm217 parts4LCERN-OHL-S-2.04RP2040/RP2350
Led draft
ErichZimmer
160 × 100 mm217 parts4LCERN-OHL-S-2.04RP2040/RP2350
Led stitched
ErichZimmer
160 × 100 mm217 parts4LCERN-OHL-S-2.04RP2040/RP2350
Opensync prototype
ErichZimmer
100 × 100 mm82 parts4LCERN-OHL-S-2.04RP2040/RP2350
Prototype eval
ErichZimmer
200 × 100 mm60 parts2LCERN-OHL-S-2.04
How designs wire the SN74LVC1T45DCKR
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the SN74LVC1T45DCKR connects to, and the resistors, capacitors and other passives placed on it.
- The VCCB pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 1 µF).
- The VCCA pin has a decoupling capacitor on 3 of 5 designs, most often 100 nF.
- The A pin has a series resistor on 3 of 5 designs, most often 33 Ω (then 10 kΩ).
- The B pin has a series resistor on 3 of 5 designs, most often 33 Ω (then 10 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VCCApin 1 | Connected to: 3.3V 60% · GND 20% · a signal 20% |
|
| GNDpin 2 | Connected to: GND 80% · a signal 20% | — |
| Apin 3 | Connected to: Signal 80% · 5V 20% |
|
| Bpin 4 | Connected to: Signal 100% |
|
| DIRpin 5 | Connected to: The microcontroller 40% · 3.3V 40% |
|
| VCCBpin 6 | Connected to: VIOA 80% · a signal 20% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Base board by GlasgowEmbedded, Usb uart shift by florolf, Opensync by ErichZimmer and Base board by nanographs.
The SN74LVC1T45DCKR in open source designs
The gallery holds 17 open source boards using the SN74LVC1T45DCKR from 5 GitHub repositories; a typical one measures about 160 × 100 mm and carries around 217 components.
71% use four copper layers or more, and 88% carry an open source license.
The most starred is Base board by GlasgowEmbedded.
Parts used alongside the SN74LVC1T45DCKR
Microcontrollers on boards using the SN74LVC1T45DCKR
SN74LVC1T45DCKR: common questions
Where can I find a SN74LVC1T45DCKR reference design?
Each of the 17 boards on this page is a real design using the SN74LVC1T45DCKR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the SN74LVC1T45DCKR VCCB pin?
The VCCB pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the SN74LVC1T45DCKR.
What decoupling capacitors do designs use on the SN74LVC1T45DCKR VCCA pin?
The VCCA pin has a decoupling capacitor on 3 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the SN74LVC1T45DCKR.
What resistor goes on the SN74LVC1T45DCKR A pin?
The A pin has a series resistor on 3 of 5 designs, most often 33 Ω (then 10 kΩ). Counted from the KiCad layouts of 5 open source designs using the SN74LVC1T45DCKR.
What parts are used alongside the SN74LVC1T45DCKR?
The APX811-40UG-7, BL24C256A-SFRC, CY7C68013A-56LTXC, DAC081C081CIMK/NOPB and ICE40HX8K-BG121 appear in the most repositories here.
Which microcontrollers do boards using the SN74LVC1T45DCKR use?
Most are built on RP2040/RP2350 (11), FPGA (2) and ESP32 (1).
How big is a typical board using the SN74LVC1T45DCKR?
The median is 160 × 100 mm, and 29% are two-layer designs.
What is the most popular open source board using the SN74LVC1T45DCKR?
By GitHub stars, Base board by GlasgowEmbedded, with 2,229 stars.
Can I simulate one of these boards using the SN74LVC1T45DCKR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.