8 open source boards using the TLV75533PDRVR
Real designs built with the TLV75533PDRVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGA
Base board
GlasgowEmbedded
80 × 49 mm222 parts4L0BSD2.2kFPGA
Base board
nanographs
80 × 49 mm234 parts4L0BSD3STM32
Main board
Qwendu
70.5 × 56.5 mm77 parts2LNo license1Compact tablet
CopperPilot
28 × 125 mm385 parts8LCERN-OHL-S-2.00STM32
Atlas drive
AtlasAutoware
140 × 90 mm377 parts6LNo license0STM32
Voicevault standalone b0
adlererik
70 × 45 mm296 parts6LNo license0Glasgow Test Jig
GlasgowEmbedded
108 × 45 mm108 parts2L0BSD2.2kGlasgow Test Jig
nanographs
108 × 45 mm108 parts2L0BSD3
How designs wire the TLV75533PDRVR
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the TLV75533PDRVR connects to, and the resistors, capacitors and other passives placed on it.
- The IN pin is tied to 5V on 6 of 6 designs.
- The OUT pin is tied to 3.3V on 5 of 6 designs.
- The EN pin has a resistor to GND on 3 of 6 designs, most often 10 kΩ (then 100 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| OUTpin 1 | Connected to: 3.3V 83% · a signal 17% | — |
| NCpin 2, 5 | Connected to: Not connected 67% · 3.3V 33% |
|
| GNDpin 3, 7 | Connected to: GND 100% | — |
| ENpin 4 | Connected to: APX811-40UG-7 33% · 5V 17% |
|
| INpin 6 | Connected to: 5V 100% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Base board by GlasgowEmbedded, Base board by nanographs, Main board by Qwendu and Voicevault standalone b0 by adlererik.
The TLV75533PDRVR in open source designs
The gallery holds 8 open source boards using the TLV75533PDRVR from 6 GitHub repositories; a typical one measures about 80 × 49 mm and carries around 228 components.
63% use four copper layers or more, and 63% carry an open source license.
The most starred is Base board by GlasgowEmbedded.
Parts used alongside the TLV75533PDRVR
What boards using the TLV75533PDRVR are built for
TLV75533PDRVR: common questions
Where can I find a TLV75533PDRVR reference design?
Each of the 8 boards on this page is a real design using the TLV75533PDRVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TLV75533PDRVR IN pin connected?
The IN pin is tied to 5V on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the TLV75533PDRVR.
How is the TLV75533PDRVR OUT pin connected?
The OUT pin is tied to 3.3V on 5 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the TLV75533PDRVR.
What resistor goes on the TLV75533PDRVR EN pin?
The EN pin has a resistor to GND on 3 of 6 designs, most often 10 kΩ (then 100 kΩ). Counted from the KiCad layouts of 6 open source designs using the TLV75533PDRVR.
What parts are used alongside the TLV75533PDRVR?
The APX811-40UG-7, BL24C256A-SFRC, CY7C68013A-56LTXC, DAC081C081CIMK/NOPB and ICE40HX8K-BG121 appear in the most repositories here.
Which microcontrollers do boards using the TLV75533PDRVR use?
Most are built on STM32 (3) and FPGA (2).
How big is a typical board using the TLV75533PDRVR?
The median is 80 × 49 mm, and 38% are two-layer designs.
What is the most popular open source board using the TLV75533PDRVR?
By GitHub stars, Base board by GlasgowEmbedded, with 2,229 stars.
Can I simulate one of these boards using the TLV75533PDRVR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.