6 open source boards using the BL24C256A-SFRC
Real designs built with the BL24C256A-SFRC, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGA
Base board
GlasgowEmbedded
80 × 49 mm222 parts4L0BSD2.2kFPGA
Base board
nanographs
80 × 49 mm234 parts4L0BSD3STM32
Acheron Joker48 template
ManoShu
298.5 × 139 mm200 parts2LMIT1Glasgow Test Jig
GlasgowEmbedded
108 × 45 mm108 parts2L0BSD2.2kGlasgow Test Jig
nanographs
108 × 45 mm108 parts2L0BSD3AVR/Arduino
Keyboard
ManoShu
298.5 × 127 mm170 parts2LMIT1
The BL24C256A-SFRC in open source designs
The gallery holds 6 open source boards using the BL24C256A-SFRC from 3 GitHub repositories; a typical one measures about 108 × 49 mm and carries around 185 components.
67% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Base board by GlasgowEmbedded.
Parts used alongside the BL24C256A-SFRC
Microcontrollers on boards using the BL24C256A-SFRC
What boards using the BL24C256A-SFRC are built for
BL24C256A-SFRC: common questions
Where can I find a BL24C256A-SFRC reference design?
Each of the 6 boards on this page is a real design using the BL24C256A-SFRC. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the BL24C256A-SFRC?
The APX811-40UG-7, CY7C68013A-56LTXC, DAC081C081CIMK/NOPB, ICE40HX8K-BG121 and INA233AIDGSR appear in the most repositories here.
Which microcontrollers do boards using the BL24C256A-SFRC use?
Most are built on FPGA (2), AVR/Arduino (1) and STM32 (1).
How big is a typical board using the BL24C256A-SFRC?
The median is 108 × 49 mm, and 67% are two-layer designs.
What is the most popular open source board using the BL24C256A-SFRC?
By GitHub stars, Base board by GlasgowEmbedded, with 2,229 stars.
Can I simulate one of these boards using the BL24C256A-SFRC before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.