18 open source boards using the SN74LVC2G66DCUR
Real designs built with the SN74LVC2G66DCUR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
QPCR-main
hisashin
100 × 94.8 mm92 parts2LGPL-3.047ESP32
Benchpod
embeddedci-com
82 × 90 mm306 parts4LCERN-OHL-W-2.01After
DD1SB
180 × 140 mm287 parts2LMIT0STM32
Pd1180-epr
techmannih
85.9 × 85.9 mm255 parts4LNo license0ESP32
Alec main
eshelton328
64 × 56 mm112 parts4LNo license0ESP32
Alec main
eshelton328
64 × 56 mm112 parts4LNo license0Before
DD1SB
180 × 140 mm287 parts2LMIT0ESP32
Esp32s3-devkit-5v
eshelton328
64 × 56 mm112 parts4LNo license0ESP32
Esp32s3-devkit-5v
eshelton328
64 × 56 mm112 parts4LNo license0Debugotron SWD Switch
alvarop
30 × 20 mm21 parts4LBSD-3-Clause52Dfm-2oz
DD1SB
180 × 140 mm287 parts2LMIT0Dfm special finish
DD1SB
180 × 140 mm287 parts2LMIT0E2-native
DD1SB
180 × 140 mm287 parts2LMIT0E4-native
DD1SB
180 × 140 mm287 parts2LMIT0E4R1-baseline
DD1SB
180 × 140 mm287 parts2LMIT0RF2M
DD1SB
150 × 110 mm287 parts2LMIT0Sliver only
DD1SB
180 × 140 mm287 parts2LMIT0Strict before
DD1SB
180 × 140 mm287 parts2LMIT0
How designs wire the SN74LVC2G66DCUR
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the SN74LVC2G66DCUR connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 6 of 7 designs, most often 100 nF (then 1 µF).
- The 1B pin has a series resistor on 4 of 7 designs, most often 4.7 kΩ.
- The 2B pin has a series resistor on 4 of 7 designs, most often 4.7 kΩ.
- The 1A pin has a series resistor on 3 of 7 designs, most often 4.7 kΩ (then 330 Ω).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| 1Apin 1 | Connected to: A connector 43%, the microcontroller 43%, RV-3028-C7 29% |
|
| 1Bpin 2 | Connected to: A connector 57% |
|
| 2Cpin 3 | Connected to: The microcontroller 29% |
|
| GNDpin 4 | Connected to: GND 100% | — |
| 2Apin 5 | Connected to: A connector 43%, the microcontroller 43%, RV-3028-C7 29% |
|
| 2Bpin 6 | Connected to: A connector 43% |
|
| 1Cpin 7 | Connected to: The microcontroller 29% |
|
| VCCpin 8 | Connected to: 3.3V 71% · a signal 29% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Debugotron SWD Switch by alvarop, QPCR-main by hisashin, Benchpod by embeddedci-com and After by DD1SB.
The SN74LVC2G66DCUR in open source designs
The gallery holds 18 open source boards using the SN74LVC2G66DCUR from 7 GitHub repositories; a typical one measures about 165 × 125 mm and carries around 287 components.
61% are two-layer designs, the rest use four layers or more, and 72% carry an open source license.
The most starred is Debugotron SWD Switch by alvarop.
Parts used alongside the SN74LVC2G66DCUR
What boards using the SN74LVC2G66DCUR are built for
SN74LVC2G66DCUR: common questions
Where can I find a SN74LVC2G66DCUR reference design?
Each of the 18 boards on this page is a real design using the SN74LVC2G66DCUR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the SN74LVC2G66DCUR VCC pin?
The VCC pin has a decoupling capacitor on 6 of 7 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 7 open source designs using the SN74LVC2G66DCUR.
What resistor goes on the SN74LVC2G66DCUR 1B pin?
The 1B pin has a series resistor on 4 of 7 designs, most often 4.7 kΩ. Counted from the KiCad layouts of 7 open source designs using the SN74LVC2G66DCUR.
What resistor goes on the SN74LVC2G66DCUR 2B pin?
The 2B pin has a series resistor on 4 of 7 designs, most often 4.7 kΩ. Counted from the KiCad layouts of 7 open source designs using the SN74LVC2G66DCUR.
What parts are used alongside the SN74LVC2G66DCUR?
The ESP32-S3-WROOM-1-N16, MAX98357A, RV-3028-C7, SN74LVC1T45DBVR and TPS63070RNMR appear in the most repositories here.
Which microcontrollers do boards using the SN74LVC2G66DCUR use?
Most are built on ESP32 (5) and STM32 (1).
How big is a typical board using the SN74LVC2G66DCUR?
The median is 165 × 125 mm, and 61% are two-layer designs.
What is the most popular open source board using the SN74LVC2G66DCUR?
By GitHub stars, Debugotron SWD Switch by alvarop, with 52 stars.
Can I simulate one of these boards using the SN74LVC2G66DCUR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.