11 open source boards using the SN76489AN
Real designs built with the SN76489AN, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Sg1000
barbeque
162.2 × 134.6 mm71 parts2LCC-BY-NC-4.033Leako
barbeque
149.1 × 98.8 mm128 parts2LNo license20Coleco original
sparkletron
168.4 × 214 mm218 parts2LMIT16RC2014 Tandy Sound Card
tebl
99.1 × 49.5 mm32 parts2LGPL-3.09Z80-SOUND
dennis9819
160 × 100.3 mm104 parts2LNo license2Basic3
barbeque
72 × 50.8 mm9 parts2LCC-BY-NC-4.033Coleco original main only
sparkletron
168.4 × 214 mm182 parts2LMIT16SN76489 MOTO
dinoflorenzi
58.4 × 69.9 mm25 parts2LNo license9Z80-TAPE
dennis9819
160 × 100.3 mm104 parts2LNo license2V9938-board
Lintaroh
100 × 135 mm57 parts2LMIT0RC6502 PSG
tebl
99.1 × 54.6 mm28 parts2LGPL-3.0192
How designs wire the SN76489AN
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the SN76489AN connects to, and the resistors, capacitors and other passives placed on it.
- The READY pin has a pull-up to 5V on 7 of 8 designs, most often 4.7 kΩ (then 10 kΩ).
- The N/C pin is left unconnected on 8 of 8 designs.
- The VCC pin has a decoupling capacitor on 6 of 8 designs, most often 100 nF.
- The AUDIO pin has a series resistor on 4 of 8 designs, most often 975 Ω (then 1.5 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| READYpin 4 | Connected to: Z80CPU 25%, 74LS05 25% |
|
| AUDIOpin 7 | Connected to: A connector 25% |
|
| GNDpin 8 | Connected to: GND 100% | — |
| N/Cpin 9 | Connected to: Not connected 100% | — |
| VCCpin 16 | Connected to: 5V 100% |
|
11 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include RC6502 PSG by tebl, Sg1000 by barbeque, Leako by barbeque and Coleco original by sparkletron.
The SN76489AN in open source designs
The gallery holds 11 open source boards using the SN76489AN from 8 GitHub repositories; a typical one measures about 149.1 × 100.3 mm and carries around 71 components.
100% are two-layer designs, the rest use four layers or more, and 45% carry an open source license.
The most starred is RC6502 PSG by tebl.
Parts used alongside the SN76489AN
What boards using the SN76489AN are built for
SN76489AN: common questions
Where can I find a SN76489AN reference design?
Each of the 11 boards on this page is a real design using the SN76489AN. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the SN76489AN READY pin?
The READY pin has a pull-up to 5V on 7 of 8 designs, most often 4.7 kΩ (then 10 kΩ). Counted from the KiCad layouts of 8 open source designs using the SN76489AN.
How is the SN76489AN N/C pin connected?
The N/C pin is left unconnected on 8 of 8 designs. Counted from the KiCad layouts of 8 open source designs using the SN76489AN.
What decoupling capacitors do designs use on the SN76489AN VCC pin?
The VCC pin has a decoupling capacitor on 6 of 8 designs, most often 100 nF. Counted from the KiCad layouts of 8 open source designs using the SN76489AN.
What parts are used alongside the SN76489AN?
The 74LS00, 74LS02, 74LS04, 74LS05 and 74LS138 appear in the most repositories here.
How big is a typical board using the SN76489AN?
The median is 149.1 × 100.3 mm, and 100% are two-layer designs.
What is the most popular open source board using the SN76489AN?
By GitHub stars, RC6502 PSG by tebl, with 192 stars.
Can I simulate one of these boards using the SN76489AN before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.