6 open source boards using the ST25DV04K-JFR6D3
Real designs built with the ST25DV04K-JFR6D3, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Outpost badge
acornitum
108.2 × 99.1 mm75 parts2LNo license19STM32
Densor
TUDSSL
46.4 × 18.8 mm24 parts2LMIT3STM32
Tide clock
weberel
72.3 × 27 mm55 parts2LCERN-OHL-W-2.01RP2040/RP2350
Outpost badge
lordbagel42
108.2 × 99.1 mm75 parts2LNo license0RP2040/RP2350
Badge
Las-Vejas
73.5 × 47.5 mm66 parts2LGPL-3.00Nfcxpansion
Las-Vejas
32 × 25.5 mm9 parts2LNo license0
How designs wire the ST25DV04K-JFR6D3
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the ST25DV04K-JFR6D3 connects to, and the resistors, capacitors and other passives placed on it.
- The NC_2 pin is left unconnected on 6 of 6 designs.
- The SDA_7 pin has a pull-up to 3.3V on 5 of 6 designs, most often 10 kΩ (then 4.7 kΩ).
- The SCL_8 pin has a pull-up to 3.3V on 5 of 6 designs, most often 10 kΩ (then 4.7 kΩ).
- The NC_9 pin is left unconnected on 6 of 6 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| LPD_1pin 1 | Connected to: Not connected 83% · a signal 17% | — |
| NC_2pin 2 | Connected to: Not connected 100% | — |
| AC0_4pin 4 | Connected to: Signal 83% · not connected 17% |
|
| AC1_5pin 5 | Connected to: Signal 83% · not connected 17% |
|
| VSS_6pin 6 | Connected to: GND 100% | — |
| SDA_7pin 7 | Connected to: The microcontroller 67%, a connector 33% |
|
| SCL_8pin 8 | Connected to: The microcontroller 67%, a connector 33% |
|
| NC_9pin 9 | Connected to: Not connected 100% | — |
| VDCG_10pin 10 | Connected to: 3.3V 83% · not connected 17% |
|
| GPO_11pin 11 | Connected to: The microcontroller 50% · not connected 17% |
|
| VCC_12pin 12 | Connected to: 3.3V 83% · a signal 17% |
|
| NC_13pin 13 | Connected to: Not connected 100% | — |
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Outpost badge by acornitum, Densor by TUDSSL, Tide clock by weberel and Badge by Las-Vejas.
The ST25DV04K-JFR6D3 in open source designs
The gallery holds 6 open source boards using the ST25DV04K-JFR6D3 from 6 GitHub repositories; a typical one measures about 72.9 × 37.3 mm and carries around 61 components.
100% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is Outpost badge by acornitum.
Parts used alongside the ST25DV04K-JFR6D3
Microcontrollers on boards using the ST25DV04K-JFR6D3
What boards using the ST25DV04K-JFR6D3 are built for
ST25DV04K-JFR6D3: common questions
Where can I find a ST25DV04K-JFR6D3 reference design?
Each of the 6 boards on this page is a real design using the ST25DV04K-JFR6D3. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the ST25DV04K-JFR6D3 NC_2 pin connected?
The NC_2 pin is left unconnected on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the ST25DV04K-JFR6D3.
What pull-up resistor is used on the ST25DV04K-JFR6D3 SDA_7 pin?
The SDA_7 pin has a pull-up to 3.3V on 5 of 6 designs, most often 10 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 6 open source designs using the ST25DV04K-JFR6D3.
What pull-up resistor is used on the ST25DV04K-JFR6D3 SCL_8 pin?
The SCL_8 pin has a pull-up to 3.3V on 5 of 6 designs, most often 10 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 6 open source designs using the ST25DV04K-JFR6D3.
What parts are used alongside the ST25DV04K-JFR6D3?
The NCP1117-3.3_SOT223, C262643, RP2350_60QFN and SRV05-4 appear in the most repositories here.
Which microcontrollers do boards using the ST25DV04K-JFR6D3 use?
Most are built on RP2040/RP2350 (3) and STM32 (2).
How big is a typical board using the ST25DV04K-JFR6D3?
The median is 72.9 × 37.3 mm, and 100% are two-layer designs.
What is the most popular open source board using the ST25DV04K-JFR6D3?
By GitHub stars, Outpost badge by acornitum, with 19 stars.
Can I simulate one of these boards using the ST25DV04K-JFR6D3 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.