7 open source boards using the STM32L432KBU6

Real designs built with the STM32L432KBU6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the STM32L432KBU6

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the STM32L432KBU6 connects to, and the resistors, capacitors and other passives placed on it.

  • The VDD pins have a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 10 µF).
  • The VDDA pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 1 µF).
  • The PC15 pin is left unconnected on 6 of 6 designs.
  • The NRST pin has a capacitor to GND on 5 of 6 designs, most often 100 nF.
VDDpin 1, 17Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (11), 10 µF (6), 1 µF (5)
PC14pin 2Connected to: Not connected 83% · a signal 17%
PC15pin 3Connected to: Not connected 100%
NRSTpin 4Connected to: A connector 83%
  • Capacitor to GND on 83% · 100 nF (4)
VDDApin 5Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (6), 1 µF (5), 10 µF (3)
PA0pin 6Connected to: Not connected 67% · a signal 33%
PA4pin 10Connected to: Not connected 67% · a signal 33%
PA5pin 11Connected to: Not connected 67% · a signal 33%
PA6pin 12Connected to: Not connected 67% · a signal 33%
PA7pin 13Connected to: Not connected 67% · a signal 33%
PB0pin 14Connected to: Not connected 100%
PB1pin 15Connected to: Not connected 83% · a signal 17%
VSSpin 16, 32, 33Connected to: GND 100%
PA8pin 18Connected to: Not connected 100%
PB4pin 27Connected to: NRF24L01P 50% · not connected 17%
  • Series resistor on 33% · 1 kΩ (1), 180 Ω (1)
PH3pin 31Connected to: Signal 100%
  • Resistor to GND on 83% · 10 kΩ (3), 2.2 kΩ (2)

14 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Projected by jonnor, STRF by AronAyub, USB2RoMeLa Boosted by RoMeLaUCLA and STM32-RF by AmziSys.

The STM32L432KBU6 in open source designs

The gallery holds 7 open source boards using the STM32L432KBU6 from 6 GitHub repositories; a typical one measures about 39 × 28 mm and carries around 38 components.

86% use four copper layers or more, and 14% carry an open source license.

The most starred is Projected by jonnor.

Parts used alongside the STM32L432KBU6

Microcontrollers on boards using the STM32L432KBU6

STM32L432KBU6: common questions

Where can I find a STM32L432KBU6 reference design?

Each of the 7 boards on this page is a real design using the STM32L432KBU6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the STM32L432KBU6 VDD pin?

The VDD pins have a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 6 open source designs using the STM32L432KBU6.

What decoupling capacitors do designs use on the STM32L432KBU6 VDDA pin?

The VDDA pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 6 open source designs using the STM32L432KBU6.

How is the STM32L432KBU6 PC15 pin connected?

The PC15 pin is left unconnected on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the STM32L432KBU6.

What parts are used alongside the STM32L432KBU6?

The USBLC6-2SC6, nRF24L01P and XC6206P332MR appear in the most repositories here.

Which microcontrollers do boards using the STM32L432KBU6 use?

Most are built on STM32 (7).

How big is a typical board using the STM32L432KBU6?

The median is 39 × 28 mm, and 14% are two-layer designs.

What is the most popular open source board using the STM32L432KBU6?

By GitHub stars, Projected by jonnor, with 43 stars.

Can I simulate one of these boards using the STM32L432KBU6 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part