7 open source boards using the STM32WB55RGVX
Real designs built with the STM32WB55RGVX, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Keyword
notaroomba
19.1 × 19.1 mm69 parts4LNo license438STM32
Cyberboard
notaroomba
51 × 21 mm64 parts4LNo license17STM32
Stm32 bluet pill
brendose
45.5 × 19.6 mm81 parts4LNo license1STM32
Keyword top
notaroomba
19.1 × 19.1 mm35 parts4LNo license438STM32
Cyberboard Panel
notaroomba
51 × 44 mm64 parts4LNo license17STM32
Wearable som
ray4477
40.3 × 40 mm48 parts4LMIT0STM32
Wearables v2
ray4477
40.3 × 40 mm47 parts2LMIT0
The STM32WB55RGVX in open source designs
The gallery holds 7 open source boards using the STM32WB55RGVX from 4 GitHub repositories; a typical one measures about 40.3 × 21 mm and carries around 64 components.
86% use four copper layers or more, and 29% carry an open source license.
The most starred is Keyword by notaroomba.
Parts used alongside the STM32WB55RGVX
Microcontrollers on boards using the STM32WB55RGVX
What boards using the STM32WB55RGVX are built for
STM32WB55RGVX: common questions
Where can I find a STM32WB55RGVX reference design?
Each of the 7 boards on this page is a real design using the STM32WB55RGVX. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the STM32WB55RGVX?
The C882955, NX2012SA-32.768KHZ-STD-MUB-2, SZYY0402Y_C434450, TPD2EUSB30 and TPS631000DRLR appear in the most repositories here.
Which microcontrollers do boards using the STM32WB55RGVX use?
Most are built on STM32 (7).
How big is a typical board using the STM32WB55RGVX?
The median is 40.3 × 21 mm, and 14% are two-layer designs.
What is the most popular open source board using the STM32WB55RGVX?
By GitHub stars, Keyword by notaroomba, with 438 stars.
Can I simulate one of these boards using the STM32WB55RGVX before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.