6 open source boards using the SY7088
Real designs built with the SY7088, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Open Source Smart Glasses
Mentra-Community
93 × 10.5 mm80 parts4LMIT1.2kESP32
GLARE
RR-CREATOR
102.4 × 27.5 mm86 parts4LMIT10ESP8266
AirMQ - ESP8266-0.4.8
AirMQ
98 × 49 mm88 parts2LCERN-OHL-P-2.02RP2040/RP2350
Open Source Smart Glasses
aezrapour
93 × 10.5 mm80 parts4LMIT0ESP8266
AirMQ - ESP8266-0.4.9
AirMQ
98 × 49 mm88 parts2LCERN-OHL-P-2.02ESP32
AirMQ - 2.0.2
AirMQ
98 × 49 mm62 parts2LCERN-OHL-P-2.02
The SY7088 in open source designs
The gallery holds 6 open source boards using the SY7088 from 4 GitHub repositories; a typical one measures about 98 × 38.3 mm and carries around 83 components.
50% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Open Source Smart Glasses by Mentra-Community.
Parts used alongside the SY7088
Microcontrollers on boards using the SY7088
What boards using the SY7088 are built for
SY7088: common questions
Where can I find a SY7088 reference design?
Each of the 6 boards on this page is a real design using the SY7088. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the SY7088?
The AP5054HTC, CH9102F, MAX17048, NCP167BMX330TBG and XC61CC3002MR appear in the most repositories here.
Which microcontrollers do boards using the SY7088 use?
Most are built on ESP32 (2), ESP8266 (2) and RP2040/RP2350 (2).
How big is a typical board using the SY7088?
The median is 98 × 38.3 mm, and 50% are two-layer designs.
What is the most popular open source board using the SY7088?
By GitHub stars, Open Source Smart Glasses by Mentra-Community, with 1,235 stars.
Can I simulate one of these boards using the SY7088 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.