3 open source boards using the XC61CC3002MR
Real designs built with the XC61CC3002MR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Open Source Smart Glasses
Mentra-Community
93 × 10.5 mm80 parts4LMIT1.2kESP32
GLARE
RR-CREATOR
102.4 × 27.5 mm86 parts4LMIT10RP2040/RP2350
Open Source Smart Glasses
aezrapour
93 × 10.5 mm80 parts4LMIT0
The XC61CC3002MR in open source designs
The gallery holds 3 open source boards using the XC61CC3002MR from 3 GitHub repositories; a typical one measures about 93 × 10.5 mm and carries around 80 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is Open Source Smart Glasses by Mentra-Community.
Parts used alongside the XC61CC3002MR
Microcontrollers on boards using the XC61CC3002MR
What boards using the XC61CC3002MR are built for
XC61CC3002MR: common questions
Where can I find a XC61CC3002MR reference design?
Each of the 3 boards on this page is a real design using the XC61CC3002MR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the XC61CC3002MR?
The AP5054HTC, CH9102F, MAX17048, NCP167BMX330TBG and SY7088 appear in the most repositories here.
Which microcontrollers do boards using the XC61CC3002MR use?
Most are built on RP2040/RP2350 (2) and ESP32 (1).
How big is a typical board using the XC61CC3002MR?
The median is 93 × 10.5 mm, and 0% are two-layer designs.
What is the most popular open source board using the XC61CC3002MR?
By GitHub stars, Open Source Smart Glasses by Mentra-Community, with 1,235 stars.
Can I simulate one of these boards using the XC61CC3002MR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.