4 open source boards using the TAD5242IRGER

Real designs built with the TAD5242IRGER, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filters|Most starred

The TAD5242IRGER in open source designs

The gallery holds 4 open source boards using the TAD5242IRGER from 4 GitHub repositories; a typical one measures about 106.7 × 50.1 mm and carries around 157 components.

100% use four copper layers or more, and 25% carry an open source license.

The most starred is Audio board by FOSDEM.

Parts used alongside the TAD5242IRGER

Microcontrollers on boards using the TAD5242IRGER

What boards using the TAD5242IRGER are built for

TAD5242IRGER: common questions

Where can I find a TAD5242IRGER reference design?

Each of the 4 boards on this page is a real design using the TAD5242IRGER. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the TAD5242IRGER?

The LM27762, OPA1612AXD, OPA1622, RP2354A and TLV76733DRVX appear in the most repositories here.

Which microcontrollers do boards using the TAD5242IRGER use?

Most are built on RP2040/RP2350 (2), NXP (1) and STM32 (1).

How big is a typical board using the TAD5242IRGER?

The median is 106.7 × 50.1 mm, and 0% are two-layer designs.

What is the most popular open source board using the TAD5242IRGER?

By GitHub stars, Audio board by FOSDEM, with 114 stars.

Can I simulate one of these boards using the TAD5242IRGER before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part