15 open source boards using the TCAN1042VDRQ1
Real designs built with the TCAN1042VDRQ1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Phase2-module
udaravima
130 × 90 mm172 parts4LGPL-3.01STM32
VCU CM4
NTURacingTeam
100 × 90 mm445 parts4LNo license0STM32
CAN-NODE-BOARD
twenty-seven27
76 × 56 mm58 parts4LNo license0STM32
VCU
NTURacingTeam
100 × 100 mm304 parts4LNo license4STM32
Phase1-module
udaravima
120 × 80 mm136 parts4LGPL-3.01STM32
VCU CM5
NTURacingTeam
100 × 90 mm418 parts4LNo license0ESP32
Phase3-manager
udaravima
100 × 80 mm80 parts2LGPL-3.01STM32
INV Discrete Controller
NTURacingTeam
100 × 100 mm351 parts4LNo license0INV MainBoard TI
NTURacingTeam
100 × 92 mm291 parts4LNo license4STM32
INV MainBoard STM
NTURacingTeam
100 × 92 mm287 parts4LNo license4STM32
INV Boost Controller
NTURacingTeam
100 × 100 mm256 parts4LNo license0STM32
Steering Panel
NTURacingTeam
90 × 80 mm243 parts4LNo license0STM32
PanelGalexy250509 1
NTURacingTeam
116 × 148 mm149 parts4LNo license4Raspberry Pi
DIY IMU RPIBASE
NTURacingTeam
60 × 65 mm73 parts4LNo license0PanelGalexy250630 0
NTURacingTeam
157.9 × 158.1 mm98 parts4LNo license4
The TCAN1042VDRQ1 in open source designs
The gallery holds 15 open source boards using the TCAN1042VDRQ1 from 4 GitHub repositories; a typical one measures about 100 × 90 mm and carries around 243 components.
93% use four copper layers or more, and 20% carry an open source license.
The most starred is VCU by NTURacingTeam.
Parts used alongside the TCAN1042VDRQ1
Microcontrollers on boards using the TCAN1042VDRQ1
What boards using the TCAN1042VDRQ1 are built for
TCAN1042VDRQ1: common questions
Where can I find a TCAN1042VDRQ1 reference design?
Each of the 15 boards on this page is a real design using the TCAN1042VDRQ1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the TCAN1042VDRQ1?
The AMS1117-3.3, CAT24C256, INA333AIDGK, LM324D and LM393 appear in the most repositories here.
Which microcontrollers do boards using the TCAN1042VDRQ1 use?
Most are built on STM32 (11), ESP32 (1) and Raspberry Pi (1).
How big is a typical board using the TCAN1042VDRQ1?
The median is 100 × 90 mm, and 7% are two-layer designs.
What is the most popular open source board using the TCAN1042VDRQ1?
By GitHub stars, VCU by NTURacingTeam, with 4 stars.
Can I simulate one of these boards using the TCAN1042VDRQ1 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.