11 open source boards using the TL064
Real designs built with the TL064, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
YM2151 VGM STM32
AidanHockey5
156.9 × 67.3 mm52 parts2LAGPL-3.081NXP
OverCycler 3 board
gligli
233.7 × 172.2 mm331 parts2LGPL-3.045Potenciostato
potenciostato
100 × 100 mm57 parts2LGPL-3.03Trem-SMD
soggybag
45 × 50 mm65 parts2LNo license0YM2151 VGM STM32
cas70240
156.9 × 67.3 mm52 parts2LAGPL-3.00- schematic only · 57 parts
Tremolo-Matic-X
soggybag
57 partsNo license0 - schematic only · 38 parts
Tremolo-Matic-XVIII
soggybag
38 partsNo license0 Potenciostato simple faz
potenciostato
100 × 100 mm56 parts2LGPL-3.03AVR/Arduino
Dz TapeDelay Control
dzavalishin
106.7 × 58.4 mm110 parts2LNo license3Potenciostato branch
potenciostato
99.7 × 99.7 mm50 parts2LGPL-3.03AudioYM2151
ddraig68k
100 × 100 mm54 parts4LMIT29
How designs wire the TL064
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the TL064 connects to, and the resistors, capacitors and other passives placed on it.
- The - pins have a series resistor on 7 of 7 designs, most often 100 kΩ (then 47 kΩ).
- Pin 8 has a series resistor on 6 of 7 designs, most often 100 Ω (then 330 Ω).
- The - pins have a series capacitor on 5 of 7 designs, most often 1 µF (then 100 pF).
- The + pins have a capacitor to GND on 4 of 7 designs, most often 3.3 nF (then 10 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: Signal 86% |
|
| -pin 2, 6, 9, 13 | Connected to: Signal 96% |
|
| +pin 3, 5, 10, 12 | Connected to: YM3012 43% · GND 25% |
|
| V+pin 4 | Connected to: 5V 86% | — |
| Pin 7 | Connected to: Signal 100% |
|
| Pin 8 | Connected to: Signal 100% |
|
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include YM2151 VGM STM32 by AidanHockey5, OverCycler 3 board by gligli, AudioYM2151 by ddraig68k and Dz TapeDelay Control by dzavalishin.
The TL064 in open source designs
The gallery holds 11 open source boards using the TL064 from 9 GitHub repositories; a typical one measures about 100 × 99.7 mm and carries around 56 components.
89% are two-layer designs, the rest use four layers or more, and 64% carry an open source license.
The most starred is YM2151 VGM STM32 by AidanHockey5.
Parts used alongside the TL064
Microcontrollers on boards using the TL064
What boards using the TL064 are built for
TL064: common questions
Where can I find a TL064 reference design?
Each of the 11 boards on this page is a real design using the TL064. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the TL064 - pin?
The - pins have a series resistor on 7 of 7 designs, most often 100 kΩ (then 47 kΩ). Counted from the KiCad layouts of 7 open source designs using the TL064.
What resistor goes on the TL064 pin 8?
Pin 8 has a series resistor on 6 of 7 designs, most often 100 Ω (then 330 Ω). Counted from the KiCad layouts of 7 open source designs using the TL064.
How is the TL064 + pin connected?
The + pins have a capacitor to GND on 4 of 7 designs, most often 3.3 nF (then 10 µF). Counted from the KiCad layouts of 7 open source designs using the TL064.
What parts are used alongside the TL064?
The LTC6903, TPA3122D2, YM2151, YM3012 and BluePill_STM32F103C appear in the most repositories here.
Which microcontrollers do boards using the TL064 use?
Most are built on AVR/Arduino (1) and NXP (1).
How big is a typical board using the TL064?
The median is 100 × 99.7 mm, and 89% are two-layer designs.
What is the most popular open source board using the TL064?
By GitHub stars, YM2151 VGM STM32 by AidanHockey5, with 81 stars.
Can I simulate one of these boards using the TL064 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.