7 open source boards using the LTC6903
Real designs built with the LTC6903, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
VGAtonic
dqydj
78.3 × 74.6 mm56 parts2LNo license133YM2151 VGM STM32
AidanHockey5
156.9 × 67.3 mm52 parts2LAGPL-3.081- schematic only · 48 partsNXP
Teensy 3 5 VGM Player YM2612 SN76489
AidanHockey5
48 partsAGPL-3.080 - schematic only · 48 partsNXP
YM2612Synth
csanchez126
48 partsMIT1 YM2151 VGM STM32
cas70240
156.9 × 67.3 mm52 parts2LAGPL-3.00AVR/Arduino
VGATonic RevB
dqydj
49.6 × 70.2 mm50 parts2LNo license133AudioYM2151
ddraig68k
100 × 100 mm54 parts4LMIT29
The LTC6903 in open source designs
The gallery holds 7 open source boards using the LTC6903 from 6 GitHub repositories; a typical one measures about 100 × 70.2 mm and carries around 52 components.
80% are two-layer designs, the rest use four layers or more, and 71% carry an open source license.
The most starred is VGAtonic by dqydj.
Parts used alongside the LTC6903
Microcontrollers on boards using the LTC6903
What boards using the LTC6903 are built for
LTC6903: common questions
Where can I find a LTC6903 reference design?
Each of the 7 boards on this page is a real design using the LTC6903. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the LTC6903?
The TL064, TPA3122D2, YM2151, YM3012 and BluePill_STM32F103C appear in the most repositories here.
Which microcontrollers do boards using the LTC6903 use?
Most are built on AVR/Arduino (2) and NXP (2).
How big is a typical board using the LTC6903?
The median is 100 × 70.2 mm, and 80% are two-layer designs.
What is the most popular open source board using the LTC6903?
By GitHub stars, VGAtonic by dqydj, with 133 stars.
Can I simulate one of these boards using the LTC6903 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.