3 open source boards using the TLP172AM
Real designs built with the TLP172AM, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
DingoPDM
corygrant
72.4 × 95.3 mm151 parts4LMIT128ESP32
Openrz67-trigger
openrz67
48 × 22 mm59 parts2LMIT3ESP32
OpenRZ67 camera trigger
mhellevang
48 × 22 mm59 parts2LMIT2
The TLP172AM in open source designs
The gallery holds 3 open source boards using the TLP172AM from 3 GitHub repositories; a typical one measures about 48 × 22 mm and carries around 59 components.
67% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is DingoPDM by corygrant.
Parts used alongside the TLP172AM
What boards using the TLP172AM are built for
TLP172AM: common questions
Where can I find a TLP172AM reference design?
Each of the 3 boards on this page is a real design using the TLP172AM. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the TLP172AM?
The BQ25185DLHR, C157925, C88374, ESP32-C3FH4 and TPS63031DSKR appear in the most repositories here.
Which microcontrollers do boards using the TLP172AM use?
Most are built on ESP32 (2) and STM32 (1).
How big is a typical board using the TLP172AM?
The median is 48 × 22 mm, and 67% are two-layer designs.
What is the most popular open source board using the TLP172AM?
By GitHub stars, DingoPDM by corygrant, with 128 stars.
Can I simulate one of these boards using the TLP172AM before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.