10 open source boards using the TLV1117-50
Real designs built with the TLV1117-50, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
Hot Plate controller
c0pperdragon
60 × 100 mm25 parts2LNo license48ESP32
QPocketPCR Main
GaudiLabs
82.5 × 140 mm96 parts2LGPL-3.021AVR/Arduino
Cococpld
mattstock
83.3 × 98.3 mm60 partsNo license7PIC
BloodHound
rc-earnest
93 × 107 mm66 parts2LNo license1Zeub
crides
180 × 60 mm402 parts2LNo license0STM32
Angst
electrodonkey
50.8 × 50.8 mm86 parts2LNo license0Kicad piezo audio amplifier
AurelienCapron
106.7 × 50.8 mm74 parts4LNo license0AVR/Arduino
Quark uno
protoplasma-mx
68.6 × 53.3 mm48 parts2LNo license0Raspberry Pi
Autonomous ir projector remote
AurelienCapron
75.4 × 53.3 mm28 parts2LNo license0ESP32
QCamPCR
GaudiLabs
82.5 × 140 mm95 parts2LGPL-3.021
How designs wire the TLV1117-50
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the TLV1117-50 connects to, and the resistors, capacitors and other passives placed on it.
- The VI pin has a decoupling capacitor on 6 of 9 designs, most often 10 µF (then 100 nF).
- The IO01 pin is left unconnected on 3 of 4 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 100% | — |
| VOpin 2 | Connected to: 5V 78% · a signal 22% |
|
| VIpin 3 | Connected to: 12V 67% · a signal 33% |
|
| IO01pin 4 | Connected to: Not connected 75% · a signal 25% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Hot Plate controller by c0pperdragon, QCamPCR by GaudiLabs, Cococpld by mattstock and BloodHound by rc-earnest.
The TLV1117-50 in open source designs
The gallery holds 10 open source boards using the TLV1117-50 from 9 GitHub repositories; a typical one measures about 82.5 × 79.2 mm and carries around 70 components.
89% are two-layer designs, the rest use four layers or more, and 20% carry an open source license.
The most starred is Hot Plate controller by c0pperdragon.
Parts used alongside the TLV1117-50
Microcontrollers on boards using the TLV1117-50
What boards using the TLV1117-50 are built for
TLV1117-50: common questions
Where can I find a TLV1117-50 reference design?
Each of the 10 boards on this page is a real design using the TLV1117-50. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the TLV1117-50 VI pin?
The VI pin has a decoupling capacitor on 6 of 9 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 9 open source designs using the TLV1117-50.
How is the TLV1117-50 IO01 pin connected?
The IO01 pin is left unconnected on 3 of 4 designs. Counted from the KiCad layouts of 9 open source designs using the TLV1117-50.
Which microcontrollers do boards using the TLV1117-50 use?
Most are built on AVR/Arduino (3), ESP32 (2), PIC (1) and Raspberry Pi (1).
How big is a typical board using the TLV1117-50?
The median is 82.5 × 79.2 mm, and 89% are two-layer designs.
What is the most popular open source board using the TLV1117-50?
By GitHub stars, Hot Plate controller by c0pperdragon, with 48 stars.
Can I simulate one of these boards using the TLV1117-50 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.