18 open source boards using the TLV1704

Real designs built with the TLV1704, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

18 boardsClear filters|Most starred

How designs wire the TLV1704

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the TLV1704 connects to, and the resistors, capacitors and other passives placed on it.

  • The - pins have a series resistor on 6 of 6 designs, most often 10 kΩ (then 100 kΩ).
  • The + pins have a series resistor on 6 of 6 designs, most often 100 kΩ (then 3 kΩ).
  • The - pins have a capacitor to GND on 5 of 6 designs, most often 10 µF (then 10 nF).
  • The + pins have a resistor to GND on 5 of 6 designs, most often 3 kΩ (then 10 kΩ).
Pin 1Connected to: TLV1704 33%
  • Series resistor on 67% · 1 kΩ (3), 100 kΩ (1), 2.2 MΩ (1)
Pin 2Connected to: Signal 100%
  • Series resistor on 67% · 1 kΩ (3), 100 kΩ (1), 2.2 MΩ (1)
V+pin 3Connected to: Signal 67% · 5V 33%
  • Capacitor to GND on 67% · 100 nF (5), 10 µF (2), 2.2 µF (1)
  • Series resistor on 67% · 100 kΩ (7), 10 kΩ (3), 33 Ω (2)
-pin 4, 6, 8, 10Connected to: Signal 96%
  • Series resistor on 100% · 10 kΩ (12), 100 kΩ (8), 3 kΩ (3)
  • Capacitor to GND on 83% · 10 µF (9), 10 nF (2), 1 µF (1)
  • Resistor to GND on 50% · 10 kΩ (4), 100 kΩ (1)
  • Pull-up to 5V on 33% · 12 kΩ (2)
+pin 5, 7, 9, 11Connected to: Signal 96%
  • Series resistor on 100% · 100 kΩ (21), 3 kΩ (3), 1 kΩ (3)
  • Resistor to GND on 83% · 3 kΩ (3), 10 kΩ (2), 100 kΩ (1)
  • Capacitor to GND on 67% · 10 µF (3), 10 nF (2)
  • Pull-up to 5V on 33% · 5.6 kΩ (2), 43 kΩ (1)
V-pin 12Connected to: GND 83% · a signal 17%
Pin 13Connected to: TLV1704 33%
  • Series resistor on 67% · 100 kΩ (7), 4.7 MΩ (3), 2.2 MΩ (1)
Pin 14Connected to: Signal 100%
  • Pull-up to 3.3V on 67% · 0 Ω (3), 10 kΩ (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ADCS by onionharvester, ADCS by stanford-ssi, Gear shifter by ManchesterStingerMotorsports and BSPD-2026 by ManchesterStingerMotorsports.

The TLV1704 in open source designs

The gallery holds 18 open source boards using the TLV1704 from 6 GitHub repositories; a typical one measures about 100 × 98 mm and carries around 470 components.

94% use four copper layers or more, and 0% carry an open source license.

The most starred is ADCS by onionharvester.

Microcontrollers on boards using the TLV1704

What boards using the TLV1704 are built for

TLV1704: common questions

Where can I find a TLV1704 reference design?

Each of the 18 boards on this page is a real design using the TLV1704. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the TLV1704 - pin?

The - pins have a series resistor on 6 of 6 designs, most often 10 kΩ (then 100 kΩ). Counted from the KiCad layouts of 6 open source designs using the TLV1704.

What resistor goes on the TLV1704 + pin?

The + pins have a series resistor on 6 of 6 designs, most often 100 kΩ (then 3 kΩ). Counted from the KiCad layouts of 6 open source designs using the TLV1704.

How is the TLV1704 V- pin connected?

The V- pin is tied to GND on 5 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the TLV1704.

What parts are used alongside the TLV1704?

The ADM1176-1ARMZ-R7, ADS7830, BMI270, EP2W+ and Orion B16 appear in the most repositories here.

Which microcontrollers do boards using the TLV1704 use?

Most are built on RISC-V (10), RP2040/RP2350 (6) and ESP32 (1).

How big is a typical board using the TLV1704?

The median is 100 × 98 mm, and 6% are two-layer designs.

What is the most popular open source board using the TLV1704?

By GitHub stars, ADCS by onionharvester, with 50 stars.

Can I simulate one of these boards using the TLV1704 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part