19 open source boards using the TPS54226PWPR

Real designs built with the TPS54226PWPR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

19 boardsClear filters|Most starred

How designs wire the TPS54226PWPR

Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the TPS54226PWPR connects to, and the resistors, capacitors and other passives placed on it.

  • The VFB pin has a pull-up to 3.3V on 8 of 8 designs, most often 73.2 kΩ.
  • The VFB pin has a resistor to GND on 8 of 8 designs, most often 22.1 kΩ.
  • The VREG5 pin has a capacitor to GND on 8 of 8 designs, most often 1 µF.
  • The VREG5 pin has a series resistor on 8 of 8 designs, most often 100 kΩ.
VOpin 1Connected to: 3.3V 100%
VFBpin 2Connected to: Signal 100%
  • Pull-up to 3.3V on 100% · 73.2 kΩ (8)
  • Resistor to GND on 100% · 22.1 kΩ (8)
VREG5pin 3Connected to: Signal 100%
  • Capacitor to GND on 100% · 1 µF (8)
  • Series resistor on 100% · 100 kΩ (8)
SSpin 4Connected to: Signal 100%
  • Capacitor to GND on 100% · 3.3 nF (8)
GNDpin 5Connected to: GND 100%
PGpin 6Connected to: Signal 100%
  • Series resistor on 100% · 100 kΩ (8)
ENpin 7Connected to: 3.3V 75% · a signal 25%
PGND1pin 8Connected to: GND 100%
PGND2pin 9Connected to: GND 100%
SW1pin 10Connected to: Signal 100%
  • Inductor on 100% · 3.3 µH (6)
  • Series capacitor on 100% · 100 nF (8)
SW2pin 11Connected to: Signal 100%
  • Inductor on 100% · 3.3 µH (6)
  • Series capacitor on 100% · 100 nF (8)
VBSTpin 12Connected to: Signal 100%
  • Series capacitor on 100% · 100 nF (8)
VINpin 13Connected to: VBATT_REG 88%
  • Decoupling capacitor on 100% · 10 µF (6), 100 µF (6)
VCCpin 14Connected to: VBATT_REG 88%
  • Decoupling capacitor on 100% · 10 µF (6), 100 µF (6)
EPADpin 15Connected to: GND 100%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ADCS by onionharvester, ADCS by stanford-ssi, FC V5d Pro Rev1 by proveskit and Distribution PCB by aati106.

The TPS54226PWPR in open source designs

The gallery holds 19 open source boards using the TPS54226PWPR from 8 GitHub repositories; a typical one measures about 89.1 × 95.2 mm and carries around 187 components.

89% use four copper layers or more, and 37% carry an open source license.

The most starred is ADCS by onionharvester.

Microcontrollers on boards using the TPS54226PWPR

TPS54226PWPR: common questions

Where can I find a TPS54226PWPR reference design?

Each of the 19 boards on this page is a real design using the TPS54226PWPR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What pull-up resistor is used on the TPS54226PWPR VFB pin?

The VFB pin has a pull-up to 3.3V on 8 of 8 designs, most often 73.2 kΩ. Counted from the KiCad layouts of 8 open source designs using the TPS54226PWPR.

How is the TPS54226PWPR VREG5 pin connected?

The VREG5 pin has a capacitor to GND on 8 of 8 designs, most often 1 µF. Counted from the KiCad layouts of 8 open source designs using the TPS54226PWPR.

How is the TPS54226PWPR SS pin connected?

The SS pin has a capacitor to GND on 8 of 8 designs, most often 3.3 nF. Counted from the KiCad layouts of 8 open source designs using the TPS54226PWPR.

What parts are used alongside the TPS54226PWPR?

The ADM1176-1ARMZ-R7, RFM98PW, W25Q80DVSNIG, BQ25883RGER and EP2W+ appear in the most repositories here.

Which microcontrollers do boards using the TPS54226PWPR use?

Most are built on RP2040/RP2350 (13), Microchip SAM (3) and Raspberry Pi (1).

How big is a typical board using the TPS54226PWPR?

The median is 89.1 × 95.2 mm, and 11% are two-layer designs.

What is the most popular open source board using the TPS54226PWPR?

By GitHub stars, ADCS by onionharvester, with 50 stars.

Can I simulate one of these boards using the TPS54226PWPR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part