11 open source boards using the ADM1176-1ARMZ-R7
Real designs built with the ADM1176-1ARMZ-R7, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Microchip SAM
Mainboard
pycubed
90.2 × 95.9 mm196 parts2LNo license97RP2040/RP2350
ADCS
onionharvester
90.2 × 95.9 mm184 parts4LNo license50RP2040/RP2350
ADCS
stanford-ssi
90.2 × 95.9 mm187 parts4LNo license13Microchip SAM
Mainboard before drastic
Sierra-Lobo
90.2 × 101.1 mm353 parts6LCC-BY-SA-4.01Microchip SAM
Mainboard
alxklso
90.2 × 95.9 mm196 parts4LMIT1Microchip SAM
Mainboard
stanford-ssi
90.2 × 95.9 mm248 parts2LNo license0RP2040/RP2350
ADCS board
pete4radio
90.2 × 95.9 mm182 parts4LNo license0RP2040/RP2350
PiCubed
stanford-ssi
90.2 × 95.9 mm176 parts4LNo license13Microchip SAM
Mainboard
Sierra-Lobo
90.2 × 101.1 mm312 parts6LCC-BY-SA-4.01RP2040/RP2350
Mainboard
pete4radio
90.2 × 95.9 mm175 parts4LNo license0RP2040/RP2350
Motor Drivers
pete4radio
90.2 × 95.9 mm164 parts4LNo license0
How designs wire the ADM1176-1ARMZ-R7
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the ADM1176-1ARMZ-R7 connects to, and the resistors, capacitors and other passives placed on it.
- The ON pin has a pull-up to VBATT on 7 of 7 designs, most often 1 kΩ.
- The TIMER pin has a capacitor to GND on 7 of 7 designs, most often 3.3 nF.
- The SCL pin has a pull-up to 3.3V on 7 of 7 designs, most often 10 kΩ.
- The SDA pin has a pull-up to 3.3V on 7 of 7 designs, most often 10 kΩ.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VCCpin 1 | Connected to: VBATT_SENSE 57% · a signal 43% |
|
| SENSEpin 2 | Connected to: VBATT 100% | — |
| ONpin 3 | Connected to: Signal 100% |
|
| GNDpin 4 | Connected to: GND 100% | — |
| TIMERpin 5 | Connected to: Signal 100% |
|
| SCLpin 6 | Connected to: BQ25883RGER 57%, ADS7830 43%, the microcontroller 29% |
|
| SDApin 7 | Connected to: BQ25883RGER 57%, ADS7830 43%, the microcontroller 29% |
|
| A0pin 8 | Connected to: Not connected 100% | — |
| A1pin 9 | Connected to: Not connected 100% | — |
| GATEpin 10 | Connected to: Not connected 100% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Mainboard by pycubed, ADCS by onionharvester, ADCS by stanford-ssi and Mainboard by alxklso.
The ADM1176-1ARMZ-R7 in open source designs
The gallery holds 11 open source boards using the ADM1176-1ARMZ-R7 from 7 GitHub repositories; a typical one measures about 90.2 × 95.9 mm and carries around 187 components.
82% use four copper layers or more, and 27% carry an open source license.
The most starred is Mainboard by pycubed.
Parts used alongside the ADM1176-1ARMZ-R7
Microcontrollers on boards using the ADM1176-1ARMZ-R7
What boards using the ADM1176-1ARMZ-R7 are built for
ADM1176-1ARMZ-R7: common questions
Where can I find a ADM1176-1ARMZ-R7 reference design?
Each of the 11 boards on this page is a real design using the ADM1176-1ARMZ-R7. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the ADM1176-1ARMZ-R7 ON pin?
The ON pin has a pull-up to VBATT on 7 of 7 designs, most often 1 kΩ. Counted from the KiCad layouts of 7 open source designs using the ADM1176-1ARMZ-R7.
How is the ADM1176-1ARMZ-R7 TIMER pin connected?
The TIMER pin has a capacitor to GND on 7 of 7 designs, most often 3.3 nF. Counted from the KiCad layouts of 7 open source designs using the ADM1176-1ARMZ-R7.
What pull-up resistor is used on the ADM1176-1ARMZ-R7 SCL pin?
The SCL pin has a pull-up to 3.3V on 7 of 7 designs, most often 10 kΩ. Counted from the KiCad layouts of 7 open source designs using the ADM1176-1ARMZ-R7.
What parts are used alongside the ADM1176-1ARMZ-R7?
The BQ25883RGER, RFM98PW, TPS54226PWPR, TPS7A4501DCQT and W25Q80DVSNIG appear in the most repositories here.
Which microcontrollers do boards using the ADM1176-1ARMZ-R7 use?
Most are built on RP2040/RP2350 (6) and Microchip SAM (5).
How big is a typical board using the ADM1176-1ARMZ-R7?
The median is 90.2 × 95.9 mm, and 18% are two-layer designs.
What is the most popular open source board using the ADM1176-1ARMZ-R7?
By GitHub stars, Mainboard by pycubed, with 97 stars.
Can I simulate one of these boards using the ADM1176-1ARMZ-R7 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.