9 open source boards using the TLV71333PDBV
Real designs built with the TLV71333PDBV, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
Sgb mbc5 1-4
MouseBiteLabs
110.7 × 69.8 mm88 parts4LCC-BY-SA-4.040AVR/Arduino
Ttntrackernode
ttnmapper
48 × 75 mm82 parts2LNo license13HackerDAQ Digital IO Card
multiplemonomials
90 × 90 mm251 parts2LNo license2TI MSP430/CC
E cribbage
tchristle
304.8 × 100.3 mm577 parts2LNo license1ESP32
Esp32 lora gateway
Kiogora
177.8 × 111.8 mm70 parts2LMIT1STM32
Business card
jaxonteague
50 × 82 mm280 parts2LNo license0HackerDAQ Main Unit
multiplemonomials
244.5 × 91 mm177 parts4LNo license2IV-6 Display Board
drewsum
200 × 50 mm227 parts2LNo license1HackerDAQ Voltage Card
multiplemonomials
90 × 90 mm78 parts2LNo license2
How designs wire the TLV71333PDBV
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the TLV71333PDBV connects to, and the resistors, capacitors and other passives placed on it.
- The IN pin has a capacitor to GND on 6 of 7 designs, most often 100 nF (then 1 µF).
- The OUT pin has a capacitor to GND on 5 of 7 designs, most often 100 nF (then 4.7 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| INpin 1 | Connected to: A connector 29% · 5V 43% |
|
| GNDpin 2 | Connected to: GND 89% | — |
| NCpin 4 | Connected to: Not connected 71% | — |
| OUTpin 5 | Connected to: A connector 29% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Sgb mbc5 1-4 by MouseBiteLabs, Ttntrackernode by ttnmapper, HackerDAQ Digital IO Card by multiplemonomials and IV-6 Display Board by drewsum.
The TLV71333PDBV in open source designs
The gallery holds 9 open source boards using the TLV71333PDBV from 7 GitHub repositories; a typical one measures about 110.7 × 90 mm and carries around 177 components.
78% are two-layer designs, the rest use four layers or more, and 22% carry an open source license.
The most starred is Sgb mbc5 1-4 by MouseBiteLabs.
Microcontrollers on boards using the TLV71333PDBV
What boards using the TLV71333PDBV are built for
TLV71333PDBV: common questions
Where can I find a TLV71333PDBV reference design?
Each of the 9 boards on this page is a real design using the TLV71333PDBV. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TLV71333PDBV IN pin connected?
The IN pin has a capacitor to GND on 6 of 7 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 7 open source designs using the TLV71333PDBV.
How is the TLV71333PDBV OUT pin connected?
The OUT pin has a capacitor to GND on 5 of 7 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 7 open source designs using the TLV71333PDBV.
Which microcontrollers do boards using the TLV71333PDBV use?
Most are built on AVR/Arduino (2), ESP32 (1), STM32 (1) and TI MSP430/CC (1).
How big is a typical board using the TLV71333PDBV?
The median is 110.7 × 90 mm, and 78% are two-layer designs.
What is the most popular open source board using the TLV71333PDBV?
By GitHub stars, Sgb mbc5 1-4 by MouseBiteLabs, with 40 stars.
Can I simulate one of these boards using the TLV71333PDBV before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.