11 open source boards using the TMS9918A

Real designs built with the TMS9918A, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

11 boardsClear filters|Most starred

How designs wire the TMS9918A

Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the TMS9918A connects to, and the resistors, capacitors and other passives placed on it.

  • The XTAL1 pin has a crystal on 10 of 11 designs, most often 10.7386 MHz (then 10.7 MHz).
  • The XTAL1 pin has a capacitor to GND on 10 of 11 designs, most often 33 pF (then 22 pF).
  • The XTAL2 pin has a crystal on 10 of 11 designs, most often 10.7386 MHz (then 10.7 MHz).
  • The XTAL2 pin has a capacitor to GND on 9 of 11 designs, most often 33 pF (then 16 pF).
VSSpin 12Connected to: GND 100%
VCCpin 33Connected to: VCC 100%
  • Decoupling capacitor on 45% · 100 nF (5)
EXTVDPpin 35Connected to: Not connected 64% · a signal 36%
COMVIDpin 36Connected to: Signal 91%
  • Series resistor on 55% · 0 Ω (5)
  • Resistor to GND on 36% · 470 Ω (4)
GROMCLKpin 37Connected to: Not connected 73% · a signal 27%
XTAL1pin 39Connected to: Signal 100%
  • Crystal on 91% · 10.7386 MHz (8), 10.7 MHz (1), 10.7387 MHz (1)
  • Capacitor to GND on 91% · 33 pF (4), 22 pF (3), 16 pF (2)
XTAL2pin 40Connected to: Signal 100%
  • Crystal on 91% · 10.7386 MHz (8), 10.7 MHz (1), 10.7387 MHz (1)
  • Capacitor to GND on 82% · 33 pF (3), 16 pF (2), 22 pF (2)

33 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Circuit Cellar E-Z Color Graphics Interface for Apple II by baldengineer, TMS9918A by jblang, TEC-1G by MarkJelic and TMS9918 by michalin.

The TMS9918A in open source designs

The gallery holds 11 open source boards using the TMS9918A from 11 GitHub repositories; a typical one measures about 100 × 85.6 mm and carries around 33 components.

91% are two-layer designs, the rest use four layers or more, and 55% carry an open source license.

The most starred is Circuit Cellar E-Z Color Graphics Interface for Apple II by baldengineer.

What boards using the TMS9918A are built for

TMS9918A: common questions

Where can I find a TMS9918A reference design?

Each of the 11 boards on this page is a real design using the TMS9918A. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the TMS9918A XTAL1 pin connected?

The XTAL1 pin has a crystal on 10 of 11 designs, most often 10.7386 MHz (then 10.7 MHz). Counted from the KiCad layouts of 11 open source designs using the TMS9918A.

How is the TMS9918A XTAL2 pin connected?

The XTAL2 pin has a crystal on 10 of 11 designs, most often 10.7386 MHz (then 10.7 MHz). Counted from the KiCad layouts of 11 open source designs using the TMS9918A.

How is the TMS9918A GROMCLK pin connected?

The GROMCLK pin is left unconnected on 8 of 11 designs (a signal on 3). Counted from the KiCad layouts of 11 open source designs using the TMS9918A.

What parts are used alongside the TMS9918A?

The 74HCT04, 74HCT574, HM62256BLP-7, 74HCT32 and 74LS02 appear in the most repositories here.

How big is a typical board using the TMS9918A?

The median is 100 × 85.6 mm, and 91% are two-layer designs.

What is the most popular open source board using the TMS9918A?

By GitHub stars, Circuit Cellar E-Z Color Graphics Interface for Apple II by baldengineer, with 442 stars.

Can I simulate one of these boards using the TMS9918A before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part