7 open source boards using the TP4057-42-SOT26-R

Real designs built with the TP4057-42-SOT26-R, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the TP4057-42-SOT26-R

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the TP4057-42-SOT26-R connects to, and the resistors, capacitors and other passives placed on it.

  • The PROG pin has a resistor to GND on 7 of 7 designs, most often 10 kΩ (then 2.2 kΩ).
  • The BAT pin is tied to BATT on 6 of 7 designs.
  • The BAT pin has a decoupling capacitor on 5 of 7 designs, most often 10 µF.
  • The VCC pin has a decoupling capacitor on 5 of 7 designs, most often 10 µF (then 1 µF).
GNDpin 2Connected to: GND 100%
BATpin 3Connected to: BATT 86%
  • Decoupling capacitor on 71% · 10 µF (5)
VCCpin 4Connected to: 5V 100%
  • Decoupling capacitor on 71% · 10 µF (4), 1 µF (1)
PROGpin 6Connected to: Signal 100%
  • Resistor to GND on 100% · 10 kΩ (6), 2.2 kΩ (2), 5.1 kΩ (1)

2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Tokay lite pcb by maxlab-io, MaxLab AI Camera by Valar-Systems, Esp32-tv hardware by atomic14 and 154-watch by martinberlin.

The TP4057-42-SOT26-R in open source designs

The gallery holds 7 open source boards using the TP4057-42-SOT26-R from 7 GitHub repositories; a typical one measures about 70 × 47 mm and carries around 79 components.

86% use four copper layers or more, and 86% carry an open source license.

The most starred is Tokay lite pcb by maxlab-io.

Microcontrollers on boards using the TP4057-42-SOT26-R

TP4057-42-SOT26-R: common questions

Where can I find a TP4057-42-SOT26-R reference design?

Each of the 7 boards on this page is a real design using the TP4057-42-SOT26-R. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the TP4057-42-SOT26-R PROG pin?

The PROG pin has a resistor to GND on 7 of 7 designs, most often 10 kΩ (then 2.2 kΩ). Counted from the KiCad layouts of 7 open source designs using the TP4057-42-SOT26-R.

How is the TP4057-42-SOT26-R BAT pin connected?

The BAT pin is tied to BATT on 6 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the TP4057-42-SOT26-R.

What decoupling capacitors do designs use on the TP4057-42-SOT26-R VCC pin?

The VCC pin has a decoupling capacitor on 5 of 7 designs, most often 10 µF (then 1 µF). Counted from the KiCad layouts of 7 open source designs using the TP4057-42-SOT26-R.

What parts are used alongside the TP4057-42-SOT26-R?

The AP1511B, AS312, ESP32-S3-WROOM-1-N16R8, LTR-303ALS-01 and MT9284-28J appear in the most repositories here.

Which microcontrollers do boards using the TP4057-42-SOT26-R use?

Most are built on ESP32 (6) and Nordic nRF (1).

How big is a typical board using the TP4057-42-SOT26-R?

The median is 70 × 47 mm, and 14% are two-layer designs.

What is the most popular open source board using the TP4057-42-SOT26-R?

By GitHub stars, Tokay lite pcb by maxlab-io, with 129 stars.

Can I simulate one of these boards using the TP4057-42-SOT26-R before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part