8 open source boards using the TPD2E2U06DRLR

Real designs built with the TPD2E2U06DRLR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

8 boardsClear filters|Most starred

How designs wire the TPD2E2U06DRLR

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the TPD2E2U06DRLR connects to, and the resistors, capacitors and other passives placed on it.

  • Pin 1 is left unconnected on 6 of 6 designs.
  • Pin 4 is tied to GND on 5 of 6 designs.
  • Pin 2 is left unconnected on 4 of 6 designs (a signal on 2).
Pin 1Connected to: Not connected 100%
Pin 2Connected to: Not connected 67% · a signal 33%
Pin 3Connected to: A connector 100%, the microcontroller 67%
  • Series resistor on 33% · 22 Ω (1), 4.7 kΩ (1)
Pin 4Connected to: GND 83% · a signal 17%
Pin 5Connected to: A connector 100%, the microcontroller 67%
  • Series resistor on 33% · 22 Ω (1), 4.7 kΩ (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include EstacionTerrena by dragondgold, Cantactpro by humancomputerintegration, Kagura by siska-tech and EstacionTerrena by dragondgold.

The TPD2E2U06DRLR in open source designs

The gallery holds 8 open source boards using the TPD2E2U06DRLR from 6 GitHub repositories; a typical one measures about 48.5 × 47.5 mm and carries around 49 components.

75% are two-layer designs, the rest use four layers or more, and 75% carry an open source license.

The most starred is EstacionTerrena by dragondgold.

Microcontrollers on boards using the TPD2E2U06DRLR

What boards using the TPD2E2U06DRLR are built for

TPD2E2U06DRLR: common questions

Where can I find a TPD2E2U06DRLR reference design?

Each of the 8 boards on this page is a real design using the TPD2E2U06DRLR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the TPD2E2U06DRLR pin 1 connected?

Pin 1 is left unconnected on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the TPD2E2U06DRLR.

How is the TPD2E2U06DRLR pin 4 connected?

Pin 4 is tied to GND on 5 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the TPD2E2U06DRLR.

How is the TPD2E2U06DRLR pin 2 connected?

Pin 2 is left unconnected on 4 of 6 designs (a signal on 2). Counted from the KiCad layouts of 6 open source designs using the TPD2E2U06DRLR.

What parts are used alongside the TPD2E2U06DRLR?

The 0915BM15A0001E, AP2114H-3.3TRG1, ATMEGA328P-AU, CC1101RGP and CSTNE16M0V530000R0 appear in the most repositories here.

Which microcontrollers do boards using the TPD2E2U06DRLR use?

Most are built on AVR/Arduino (2), NXP (2), PIC (1) and RP2040/RP2350 (1).

How big is a typical board using the TPD2E2U06DRLR?

The median is 48.5 × 47.5 mm, and 75% are two-layer designs.

What is the most popular open source board using the TPD2E2U06DRLR?

By GitHub stars, EstacionTerrena by dragondgold, with 5 stars.

Can I simulate one of these boards using the TPD2E2U06DRLR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part