8 open source boards using the TPS2051BDBVR

Real designs built with the TPS2051BDBVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

8 boardsClear filters|Most starred

The TPS2051BDBVR in open source designs

The gallery holds 8 open source boards using the TPS2051BDBVR from 5 GitHub repositories; a typical one measures about 139.3 × 82.5 mm and carries around 191 components.

100% use four copper layers or more, and 13% carry an open source license.

The most starred is EEZ BB3 CM4 R1B0 by intergalaktik.

Microcontrollers on boards using the TPS2051BDBVR

TPS2051BDBVR: common questions

Where can I find a TPS2051BDBVR reference design?

Each of the 8 boards on this page is a real design using the TPS2051BDBVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the TPS2051BDBVR?

The DP83848CVV_NOPB, IS42S16400J, LD1117ADT33TR, TPD4E001DRLR and TPS61169DCKR appear in the most repositories here.

Which microcontrollers do boards using the TPS2051BDBVR use?

Most are built on STM32 (5), FPGA (1) and RP2040/RP2350 (1).

How big is a typical board using the TPS2051BDBVR?

The median is 139.3 × 82.5 mm, and 0% are two-layer designs.

What is the most popular open source board using the TPS2051BDBVR?

By GitHub stars, EEZ BB3 CM4 R1B0 by intergalaktik, with 35 stars.

Can I simulate one of these boards using the TPS2051BDBVR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part