6 open source boards using the TPS22919DCK
Real designs built with the TPS22919DCK, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Barebones
nzevh
354 × 150 mm1026 parts8LCERN-OHL-S-2.019FPGA
PROGLOG01
mlab-modules
60.5 × 40.1 mm62 parts2LNo license1FPGA
PeriR
nihcoc
137.4 × 81.3 mm249 parts6LCustom license0AVR/Arduino
USTSIPIN02
ust-modules
90.9 × 50.3 mm153 parts4LGPL-3.00YETI60
wZuck
285 × 94.6 mm77 parts4LNo license0RP2040/RP2350
Universal Power Delivery and Control Board
Oscyloskop444
99.5 × 69.3 mm174 parts4LGPL-3.00
How designs wire the TPS22919DCK
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the TPS22919DCK connects to, and the resistors, capacitors and other passives placed on it.
- The NC_4 pin is left unconnected on 6 of 6 designs.
- The IN_1 pin has a capacitor to GND on 4 of 6 designs, most often 100 nF (then 10 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| IN_1pin 1 | Connected to: 3.3V 50% · a signal 50% |
|
| GND_2pin 2 | Connected to: GND 100% | — |
| ON_3pin 3 | Connected to: Signal 83% · 1.2V 17% |
|
| NC_4pin 4 | Connected to: Not connected 100% | — |
| OUT_6pin 6 | Connected to: VCCIO_1 50% · a signal 50% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Barebones by nzevh, PROGLOG01 by mlab-modules, PeriR by nihcoc and Universal Power Delivery and Control Board by Oscyloskop444.
The TPS22919DCK in open source designs
The gallery holds 6 open source boards using the TPS22919DCK from 6 GitHub repositories; a typical one measures about 118.5 × 75.3 mm and carries around 164 components.
83% use four copper layers or more, and 50% carry an open source license.
The most starred is Barebones by nzevh.
Parts used alongside the TPS22919DCK
Microcontrollers on boards using the TPS22919DCK
What boards using the TPS22919DCK are built for
TPS22919DCK: common questions
Where can I find a TPS22919DCK reference design?
Each of the 6 boards on this page is a real design using the TPS22919DCK. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TPS22919DCK NC_4 pin connected?
The NC_4 pin is left unconnected on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the TPS22919DCK.
How is the TPS22919DCK IN_1 pin connected?
The IN_1 pin has a capacitor to GND on 4 of 6 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 6 open source designs using the TPS22919DCK.
Which microcontrollers do boards using the TPS22919DCK use?
Most are built on FPGA (2), AVR/Arduino (1), RP2040/RP2350 (1) and STM32 (1).
How big is a typical board using the TPS22919DCK?
The median is 118.5 × 75.3 mm, and 17% are two-layer designs.
What is the most popular open source board using the TPS22919DCK?
By GitHub stars, Barebones by nzevh, with 19 stars.
Can I simulate one of these boards using the TPS22919DCK before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.