8 open source boards using the TPS561201DDCR
Real designs built with the TPS561201DDCR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Autotrainer Pellet Module
Mouse-GYM
114.3 × 108 mm140 parts4LNo license0DishyPi1
jrseti
94.6 × 69.3 mm102 parts4LMIT0ESP32
Smt pickup
discreetmayor
59.9 × 61.5 mm76 parts4LNo license0RP2040/RP2350
QD-Main board
Cheesylorry
93.1 × 49.5 mm33 parts2LGPL-2.00STM32
Magnet Module
Mouse-GYM
71 × 89 mm117 parts4LNo license0DishyPi1
jrseti
94.6 × 69.3 mm102 parts4LMIT0Power supply
jrseti
22.5 × 44 mm20 parts4LMIT0Power supply
jrseti
22.5 × 44 mm20 parts4LMIT0
How designs wire the TPS561201DDCR
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TPS561201DDCR connects to, and the resistors, capacitors and other passives placed on it.
- The SW pin has a series capacitor on 5 of 5 designs, most often 100 nF.
- The VFB pin has a resistor to GND on 5 of 5 designs, most often 10 kΩ.
- The VBST pin has a series capacitor on 5 of 5 designs, most often 100 nF.
- The SW pin has a inductor on 4 of 5 designs, most often 3.3 µH (then 4.7 µH).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 100% | — |
| SWpin 2 | Connected to: Signal 100% |
|
| VINpin 3 | Connected to: 12V 80% · a signal 20% |
|
| VFBpin 4 | Connected to: Signal 100% |
|
| ENpin 5 | Connected to: 12V 80% · a signal 20% | — |
| VBSTpin 6 | Connected to: Signal 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include QD-Main board by Cheesylorry, Smt pickup by discreetmayor, DishyPi1 by jrseti and DishyPi1 by jrseti.
The TPS561201DDCR in open source designs
The gallery holds 8 open source boards using the TPS561201DDCR from 5 GitHub repositories; a typical one measures about 82 × 65.4 mm and carries around 89 components.
88% use four copper layers or more, and 63% carry an open source license.
The most starred is Autotrainer Pellet Module by Mouse-GYM.
Parts used alongside the TPS561201DDCR
Microcontrollers on boards using the TPS561201DDCR
What boards using the TPS561201DDCR are built for
TPS561201DDCR: common questions
Where can I find a TPS561201DDCR reference design?
Each of the 8 boards on this page is a real design using the TPS561201DDCR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TPS561201DDCR SW pin connected?
The SW pin has a series capacitor on 5 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the TPS561201DDCR.
What resistor goes on the TPS561201DDCR VFB pin?
The VFB pin has a resistor to GND on 5 of 5 designs, most often 10 kΩ. Counted from the KiCad layouts of 5 open source designs using the TPS561201DDCR.
How is the TPS561201DDCR VBST pin connected?
The VBST pin has a series capacitor on 5 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the TPS561201DDCR.
What parts are used alongside the TPS561201DDCR?
The CAT24C256WI-GT3, ISO1540DR, LM75BIMX-5/NOPB, LTC4311ISC6#TRPBF and LTV-817S-TA1 appear in the most repositories here.
Which microcontrollers do boards using the TPS561201DDCR use?
Most are built on STM32 (2), ESP32 (1) and RP2040/RP2350 (1).
How big is a typical board using the TPS561201DDCR?
The median is 82 × 65.4 mm, and 13% are two-layer designs.
What is the most popular open source board using the TPS561201DDCR?
By GitHub stars, Autotrainer Pellet Module by Mouse-GYM, with 0 stars.
Can I simulate one of these boards using the TPS561201DDCR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.