7 open source boards using the LTV-827S-TA1

Real designs built with the LTV-827S-TA1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

The LTV-827S-TA1 in open source designs

The gallery holds 7 open source boards using the LTV-827S-TA1 from 4 GitHub repositories; a typical one measures about 68.5 × 64 mm and carries around 57 components.

57% use four copper layers or more, and 100% carry an open source license.

The most starred is ESPDrive by Ehryk.

Microcontrollers on boards using the LTV-827S-TA1

What boards using the LTV-827S-TA1 are built for

LTV-827S-TA1: common questions

Where can I find a LTV-827S-TA1 reference design?

Each of the 7 boards on this page is a real design using the LTV-827S-TA1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the LTV-827S-TA1?

The CAT24C256WI-GT3, ISO1540DR, LM75BIMX-5/NOPB, LTC4311ISC6#TRPBF and LTV-817S-TA1 appear in the most repositories here.

Which microcontrollers do boards using the LTV-827S-TA1 use?

Most are built on ESP32 (3) and STM32 (1).

How big is a typical board using the LTV-827S-TA1?

The median is 68.5 × 64 mm, and 43% are two-layer designs.

What is the most popular open source board using the LTV-827S-TA1?

By GitHub stars, ESPDrive by Ehryk, with 2 stars.

Can I simulate one of these boards using the LTV-827S-TA1 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part