5 open source boards using the TPS61165DRVR
Real designs built with the TPS61165DRVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Compact tablet
CopperPilot
28 × 125 mm385 parts8LCERN-OHL-S-2.00Pokeboy
cameo-5958
79.4 × 119.4 mm111 parts4LMIT0- schematic only · 562 partsRaspberry Pi
OpenXTCM5-Head-Unit
mibs510
562 parts2LMIT0 STM32
Displayunit
muccc
155 × 69.8 mm143 parts4LGPL-3.084STM32
Front panel controller
birdybro
150 × 90 mm103 parts6LGPL-3.00
The TPS61165DRVR in open source designs
The gallery holds 5 open source boards using the TPS61165DRVR from 5 GitHub repositories; a typical one measures about 114.7 × 104.7 mm and carries around 143 components.
80% use four copper layers or more, and 100% carry an open source license.
The most starred is Displayunit by muccc.
Parts used alongside the TPS61165DRVR
Microcontrollers on boards using the TPS61165DRVR
What boards using the TPS61165DRVR are built for
TPS61165DRVR: common questions
Where can I find a TPS61165DRVR reference design?
Each of the 5 boards on this page is a real design using the TPS61165DRVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the TPS61165DRVR use?
Most are built on STM32 (2) and Raspberry Pi (1).
How big is a typical board using the TPS61165DRVR?
The median is 114.7 × 104.7 mm, and 20% are two-layer designs.
What is the most popular open source board using the TPS61165DRVR?
By GitHub stars, Displayunit by muccc, with 84 stars.
Can I simulate one of these boards using the TPS61165DRVR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.