16 open source boards using the TPS62410
Real designs built with the TPS62410, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
NXP
Hackrf one
Charmve
120 × 75 mm416 partsBSD-2-Clause354NXP
Marzipan
Josephrp
120 × 75 mm416 partsCustom license12NXP
Marzipan
alexmfz
120 × 75 mm416 partsGPL-2.03NXP
Marzipan
greearb
120 × 75 mm416 partsGPL-2.01NXP
Marzipan
JensLiu
120 × 75 mm416 partsGPL-2.01NXP
Hackrf one
2ftg
120 × 75 mm416 partsGPL-2.00NXP
Marzipan
deepin-community
120 × 75 mm416 partsGPL-2.00NXP
Hackrf one
Meteora-Z
120 × 75 mm416 partsNo license0NXP
Hackrf one
Toysoft
120 × 75 mm416 partsGPL-2.00NXP
Hackrf one
zqupc
120 × 75 mm416 partsGPL-2.00NXP
Marzipan
Charmve
120 × 75 mm416 partsBSD-2-Clause354NXP
HackRF One
alexmfz
120 × 75 mm415 partsGPL-2.03NXP
Marzipan
Toysoft
120 × 75 mm416 partsGPL-2.00NXP
Marzipan
Meteora-Z
120 × 75 mm416 partsNo license0NXP
Marzipan
zqupc
120 × 75 mm416 partsGPL-2.00NXP
Marzipan
2ftg
120 × 75 mm416 partsGPL-2.00
How designs wire the TPS62410
Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the TPS62410 connects to, and the resistors, capacitors and other passives placed on it.
- Pin 1 has a resistor to GND on 10 of 10 designs, most often 162 kΩ.
- Pin 1 has a series resistor on 10 of 10 designs, most often 330 kΩ.
- Pin 1 has a series capacitor on 10 of 10 designs, most often 33 pF.
- Pin 2 has a pull-up to VREGMODE on 10 of 10 designs, most often 10 kΩ.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 0 | Connected to: GND 100% | — |
| Pin 1 | Connected to: Signal 100% |
|
| Pin 2 | Connected to: Signal 100% |
|
| Pin 3 | Connected to: VIN 100% |
|
| Pin 4 | Connected to: A connector 90% |
|
| Pin 5 | Connected to: Signal 100% |
|
| Pin 6 | Connected to: Signal 100% |
|
| Pin 7 | Connected to: Signal 100% |
|
| Pin 8 | Connected to: GND 100% | — |
| Pin 9 | Connected to: A connector 100%, LPC43XXFBD144 60%, the microcontroller 40% |
|
| Pin 10 | Connected to: Signal 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Hackrf one by Charmve, Marzipan by Josephrp, HackRF One by alexmfz and Marzipan by greearb.
The TPS62410 in open source designs
The gallery holds 16 open source boards using the TPS62410 from 10 GitHub repositories; a typical one measures about 120 × 75 mm and carries around 416 components.
81% carry an open source license.
The most starred is Hackrf one by Charmve.
Parts used alongside the TPS62410
Microcontrollers on boards using the TPS62410
What boards using the TPS62410 are built for
TPS62410: common questions
Where can I find a TPS62410 reference design?
Each of the 16 boards on this page is a real design using the TPS62410. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the TPS62410 pin 1?
Pin 1 has a resistor to GND on 10 of 10 designs, most often 162 kΩ. Counted from the KiCad layouts of 10 open source designs using the TPS62410.
What pull-up resistor is used on the TPS62410 pin 2?
Pin 2 has a pull-up to VREGMODE on 10 of 10 designs, most often 10 kΩ. Counted from the KiCad layouts of 10 open source designs using the TPS62410.
What decoupling capacitors do designs use on the TPS62410 pin 3?
Pin 3 has a decoupling capacitor on 10 of 10 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 10 open source designs using the TPS62410.
What parts are used alongside the TPS62410?
The GSG-XC2C64A-7VQG100C, MAX2837, MAX5864, MGA-81563 and RFFC5072 appear in the most repositories here.
Which microcontrollers do boards using the TPS62410 use?
Most are built on NXP (16).
How big is a typical board using the TPS62410?
The median is 120 × 75 mm.
What is the most popular open source board using the TPS62410?
By GitHub stars, Hackrf one by Charmve, with 354 stars.
Can I simulate one of these boards using the TPS62410 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.