5 open source boards using the TPS651851RSLR
Real designs built with the TPS651851RSLR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Epaper breakout
jifanchn
100 × 45 mm98 parts4LNo license5Scratch-001
CrypticRage
65 × 64.5 mm109 parts4LNo license0ESP32
Epaper breakout
entozoon
100 × 45 mm98 parts4LNo license0ESP32
Epaper breakout
orgTestCodacy11KRepos110MB
100 × 45 mm98 parts4LNo license0ESP32
Epaper breakout
SkinnyGnome
100 × 45 mm98 parts4LNo license0
How designs wire the TPS651851RSLR
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TPS651851RSLR connects to, and the resistors, capacitors and other passives placed on it.
- The VREF_1 pin has a capacitor to GND on 5 of 5 designs, most often 4.7 µF.
- The INT_2 pin has a pull-up to 3.3V on 5 of 5 designs, most often 10 kΩ.
- The VNEG_3 pin has a decoupling capacitor on 5 of 5 designs, most often 4.7 µF.
- The VNEG_IN_4 pin has a capacitor to GND on 5 of 5 designs, most often 4.7 µF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VREF_1pin 1 | Connected to: Signal 100% |
|
| INT_2pin 2 | Connected to: PCA9535PW 80% |
|
| VNEG_3pin 3 | Connected to: -15V 80% · a signal 20% |
|
| VNEG_IN_4pin 4 | Connected to: Signal 100% |
|
| DGND_6pin 6 | Connected to: GND 100% | — |
| INT_LDO_7pin 7 | Connected to: Signal 100% |
|
| AGND1_8pin 8 | Connected to: GND 100% | — |
| VNEG_DIS_9pin 9 | Connected to: -15V 80% · a signal 20% | — |
| VIN_10pin 10 | Connected to: MCP1700-3302E_SOT23 80%, TPS2113APW 80%, a connector 80% · VBUS 20% |
|
| NC_11pin 11 | Connected to: Not connected 100% | — |
| NC_13pin 13 | Connected to: Not connected 100% | — |
| VCOM_DIS_14pin 14 | Connected to: GND 100% | — |
| VCOM_15pin 15 | Connected to: A connector 100%, ED060XC5 80% |
|
| VCOM_PWR_16pin 16 | Connected to: Signal 100% |
|
| SCL_17pin 17 | Connected to: A connector 100%, PCA9535PW 80%, the microcontroller 80% |
|
| SDA_18pin 18 | Connected to: A connector 100%, PCA9535PW 80%, the microcontroller 80% |
|
| VPOS_DIS_19pin 19 | Connected to: 15V 80% · a signal 20% | — |
| NC_20pin 20 | Connected to: Not connected 100% | — |
| PBKG_22pin 22 | Connected to: Signal 100% |
|
| PWR_GOOD_23pin 23 | Connected to: PCA9535PW 80% |
|
| VIN_P_24pin 24 | Connected to: MCP1700-3302E_SOT23 80%, TPS2113APW 80%, a connector 80% · VBUS 20% |
|
| VN_SW_25pin 25 | Connected to: Signal 100% |
|
| VN_26pin 26 | Connected to: Signal 100% |
|
| VEE_IN_27pin 27 | Connected to: Signal 100% |
|
| VEE_DRV_28pin 28 | Connected to: Signal 100% |
|
| VEE_DIS_29pin 29 | Connected to: -20V 80% · not connected 20% | — |
| VEE_D_30pin 30 | Connected to: Signal 100% |
|
| VEE_FB_31pin 31 | Connected to: Signal 100% |
|
| PGND2_32pin 32 | Connected to: GND 100% | — |
| VDDH_FB_33pin 33 | Connected to: Signal 100% |
|
| VDDH_D_34pin 34 | Connected to: Signal 100% |
|
| VDDH_DIS_35pin 35 | Connected to: 22V 80% · a signal 20% | — |
| VDDH_DRV_36pin 36 | Connected to: Signal 100% |
|
| VDDH_IN_37pin 37 | Connected to: Signal 100% |
|
| NC_38pin 38 | Connected to: Not connected 100% | — |
| NC_39pin 39 | Connected to: Not connected 100% | — |
| VB_SW_40pin 40 | Connected to: Signal 100% |
|
| PGND1_41pin 41 | Connected to: GND 100% | — |
| VB_42pin 42 | Connected to: Signal 100% |
|
| VPOS_IN_43pin 43 | Connected to: Signal 100% |
|
9 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Epaper breakout by jifanchn, Scratch-001 by CrypticRage, Epaper breakout by entozoon and Epaper breakout by orgTestCodacy11KRepos110MB.
The TPS651851RSLR in open source designs
The gallery holds 5 open source boards using the TPS651851RSLR from 5 GitHub repositories; a typical one measures about 100 × 45 mm and carries around 98 components.
100% use four copper layers or more, and 0% carry an open source license.
The most starred is Epaper breakout by jifanchn.
Parts used alongside the TPS651851RSLR
Microcontrollers on boards using the TPS651851RSLR
What boards using the TPS651851RSLR are built for
TPS651851RSLR: common questions
Where can I find a TPS651851RSLR reference design?
Each of the 5 boards on this page is a real design using the TPS651851RSLR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TPS651851RSLR VREF_1 pin connected?
The VREF_1 pin has a capacitor to GND on 5 of 5 designs, most often 4.7 µF. Counted from the KiCad layouts of 5 open source designs using the TPS651851RSLR.
What pull-up resistor is used on the TPS651851RSLR INT_2 pin?
The INT_2 pin has a pull-up to 3.3V on 5 of 5 designs, most often 10 kΩ. Counted from the KiCad layouts of 5 open source designs using the TPS651851RSLR.
What decoupling capacitors do designs use on the TPS651851RSLR VNEG_3 pin?
The VNEG_3 pin has a decoupling capacitor on 5 of 5 designs, most often 4.7 µF. Counted from the KiCad layouts of 5 open source designs using the TPS651851RSLR.
What parts are used alongside the TPS651851RSLR?
The CH340C, ED060XC5, ESP32-WROVER, MCP1700-3302E_SOT23 and PCA9535PW appear in the most repositories here.
Which microcontrollers do boards using the TPS651851RSLR use?
Most are built on ESP32 (4).
How big is a typical board using the TPS651851RSLR?
The median is 100 × 45 mm, and 0% are two-layer designs.
What is the most popular open source board using the TPS651851RSLR?
By GitHub stars, Epaper breakout by jifanchn, with 5 stars.
Can I simulate one of these boards using the TPS651851RSLR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.